M4A5-384/128-5SAC Просмотр технического описания (PDF) - Lattice Semiconductor

Номер в каталоге

Компоненты Описание

производитель

M4A5-384/128-5SAC

ispMACH™ 4A CPLD Family High Performance E2CMOS® In-System Programmable Logic

Lattice Semiconductor 

ABSOLUTE MAXIMUM RATINGS

M4A5

Storage Temperature. . . . . . . . . . . . . . . . . . . -65°C to +150°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . . . . . . . . -55°C to +100°C

Device Junction Temperature. . . . . . . . . . . . . . . . . . . . +130°C

Supply Voltage

with Respect to Ground . . . . . . . . . . . . . . . . .-0.5 V to +7.0 V

DC Input Voltage . . . . . . . . . . . . . . . . . -0.5 V to VCC + 0.5 V

Static Discharge Voltage . . . . . . . . . . . . . . . . . . . . . . . . 2000 V

Latchup Current (TA = -40°C to +85°C) . . . . . . . . . . 200 mA

Stresses above those listed under Absolute Maximum Ratings may cause per-

manent device failure. Functionality at or above these limits is not implied. Expo-

sure to Absolute Maximum Ratings for extended periods may affect device

reliability.

OPERATING RANGES

Commercial (C) Devices

Ambient Temperature (TA)

Operating in Free Air . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C

Supply Voltage (VCC)

with Respect to Ground. . . . . . . . . . . . . . +4.75 V to +5.25 V

Industrial (I) Devices

Ambient Temperature (TA)

Operating in Free Air . . . . . . . . . . . . . . . . . . . .-40°C to +85°C

Supply Voltage (VCC)

with Respect to Ground. . . . . . . . . . . . . . . +4.50 V to +5.5 V

Operating ranges define those limits between which the functionality of the device is

guaranteed.

5-V DC CHARACTERISTICS OVER OPERATING RANGES

Parameter

Symbol

Parameter Description

Test Conditions

Min Typ Max Unit

VOH

Output HIGH Voltage

VOL

Output LOW Voltage

VIH

Input HIGH Voltage

IOH = –3.2 mA, VCC = Min, VIN = VIH or VIL

2.4

V

IOH = -100 µA, VCC = Max, VIN = VIH or VIL

3.3

3.6

V

IOL = 24 mA, VCC = Min, VIN = VIH or VIL (Note 1)

0.5

V

Guaranteed Input Logical HIGH Voltage for all Inputs

(Note 2)

2.0

V

VIL

Input LOW Voltage

Guaranteed Input Logical LOW Voltage for all Inputs

(Note 2)

0.8

V

IIH

Input HIGH Leakage Current

VIN = 5.25 V, VCC = Max (Note 3)

IIL

Input LOW Leakage Current

VIN = 0 V, VCC = Max (Note 3)

IOZH

Off-State Output Leakage Current HIGH VOUT = 5.25 V, VCC = Max, VIN = VIH or VIL (Note 3)

IOZL

Off-State Output Leakage Current LOW VOUT = 0 V, VCC = Max , VIN = VIH or VIL (Note 3)

ISC

Output Short-Circuit Current

VOUT = 0.5 V, VCC = Max (Note 4)

–30

10

μA

–10

μA

10

μA

–10

μA

–160 mA

Notes:

1. Total IOL for one PAL block should not exceed 64 mA.

2. These are absolute values with respect to device ground, and all overshoots due to system or tester noise are included.

3. I/O pin leakage is the worst case of IIL and IOZL (or IIH and IOZH).

4. Not more than one output should be shorted at a time and duration of the short-circuit should not exceed one second.

VOUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.

36

ispMACH 4A Family

Share Link: