Signal Pins
Table 2-2 Signal and Package Information for the 144-Pin LQFP (Continued)
Signal Name Pin No. Type
State
During
Reset
Signal Description
D7
28
Input/
In reset, Data Bus — D7 - D14 specify part of the data for external program
Output
output is or data memory accesses.
disabled,
pull-up is Most designs will want to change the DRV state to DRV = 1 instead of
enabled using the default setting.
(GPIOF0)
D8
(GPIOF1)
D9
(GPIOF2)
D10
(GPIOF3)
D11
(GPIOF4)
D12
(GPIOF5)
D13
(GPIOF6)
D14
(GPIOF7)
D15
Input/
Output
29
30
32
133
Port F GPIO — These eight GPIO pins can be individually
programmed as input or output pins.
At reset, these pins default to Data Bus functionality.
To deactivate the internal pull-up resistor, clear the appropriate
GPIO bit in the GPIOF_PUR register.
Example: GPIOF0, clear bit 0 in the GPIOF_PUR register.
134
135
136
137
Input/
In reset, Data Bus — D15 specifies part of the data for external program or
Output
output is data memory accesses.
disabled,
pull-up is Most designs will want to change the DRV state to DRV = 1 instead of
enabled using the default setting.
(GPIOF8)
Input/
Output
Port F GPIO — This GPIO pin can be individually programmed as
an input or output pin.
At reset, this pin defaults to the Data Bus function.
To deactivate the internal pull-up resistor, clear bit 8 in the
GPIOF_PUR register.
56F8356 Technical Data, Rev. 13
Freescale Semiconductor
23
Preliminary