LC6514B Просмотр технического описания (PDF) - SANYO -> Panasonic

Номер в каталоге

Компоненты Описание

производитель

LC6514B

Single-Chip 4-bit Microcontroller (Low-Threshold Input, On-Chip FLT Driver)

SANYO -> Panasonic 

LC6514B

Continued from preceding page.

Mnemonic

SCTL bit

RCTL bit

WTTM

Set control register

bit (S)

Reset control

register bit (S)

Write timmer

HALT

NOP

Halt

No operation

Instuction code

D7D6D5D4

0010

1000

0010

1001

1111

D3D2D1D0

1100

B3B2B1B0

1100

B3B2B1B0

1001

1111

0110

Bytes Cycles

Function

2

2 CTL←(CTL) V

B3B2B1B0

2

2 CTL←(CTL)

B3B2B1B0

1

1 TM←(E), (AC)

TMF←0

1

1 Halt

Description

Immediate data B3B2B1B0-specified bits

in the control register are set.

Immediate data B3B2B1B0-specified bits

in the control register are reset.

The E and AC contents are loaded in the

timer. The TMF is reset.

The standby mode is entered.

Status

flag

affected

ZF

TMF

Remarks

0000

*1

0000

1

1 No operation

No operation is performed, but 1

machine cycle is consumed.

If the L1 instruction or CLA instruction is used consecutively in such a manner

as LI, LI, LI, -----, or CLA, CLA, CLA,-----, the first LI instruction or CLA

instruction only is effective and the following LI instructions or CLA instruc-

tions are changed to the NOP instructions.

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co., Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of October, 2001. Specifications and information herein are subject

to change without notice.

PS No.1802–17/17

Share Link: