S-24C32C Просмотр технического описания (PDF) - Seiko Instruments Inc

Номер в каталоге

Компоненты Описание

производитель

S-24C32C

2-WIRE SERIAL E2PROM

Seiko Instruments Inc 

2-WIRE SERIAL E2PROM

S-24C32C/64C

Rev.4.0_02_H

5. Device Addressing

To start communication, the master device on the system generates a start condition to the bus line. Next, the master

device sends 7-bit device address and a 1-bit read / write instruction code on to the SDA bus.

The upper 4 bits of the device address are the “Device Code”, and are fixed to “1010”.

In the S-24C32C/64C, successive 3 bits are the “Slave Address”. These 3 bits are used to identify a device on the

system bus and is compared with the predetermined value which is defined by the address input pins (A2, A1, A0).

When the comparison result matches, the slave device responds with an acknowlede during the 9th clocks cycle.

Device Code

1

0

1

0

MSB

Slave

Address

A2 A1 A0 R / W

LSB

Figure 13 Device Address

12

Share Link: