(8K x 16-Bit) Dual Port RAM High-Speed CMOS
7025E
FIGURE 5. TIMING WAVEFORM OF WRITE WITH PORT-TO-PORT 1,2,3 (FOR SLAVE ONLY)
1. Assume BUSY Input = H or the writing port, and OE = L for the reading port.
2. Write cycle parameters should be adhered to, to ensure proper writing.
3. Device is continuously enable for both ports.
FIGURE 6. TIMING WAVEFORM OF WRITE CYCLE NO. 1, R/W CONTROLLED TIMING1,2,3,7
1000586
12.19.01 Rev 2
All data sheets are subject to change without notice 12
©2001 Maxwell Technologies
All rights reserved.