Philips Semiconductors
LCD driver for low multiplex rates
Product specification
OM4068
Backplane outputs
The LCD drive section includes three backplane outputs (BP1 to BP3) which should be connected directly to the LCD.
The backplane output signals are generated in accordance with the selected LCD drive mode. If less than three
backplane outputs are required the unused outputs should be left open-circuit. In 1 : 2 multiplex drive mode, BP3 is set
to 1⁄2VLCD. In static drive mode BP3 and BP2 are set to VSS.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
VDD
VLCD
VI
VO
II
IO
IDD, ISS, ILCD
Ptot(pack)
P/out
Tamb
Tstg
Tj
Ves
PARAMETER
supply voltage
LCD supply voltage
input voltage (any input)
output voltage
(BP1, BP2, BP3, S1 to S32 and VLCD)
DC input current
DC output current
VDD, VSS or VLCD current
total power dissipation per package
power dissipation per output
operating ambient temperature
storage temperature
junction temperature
electrostatic handling
CONDITIONS
note 1
note 2
MIN.
−0.5
−0.5
−0.5
−0.5
−10
−10
−50
−
−
−40
−65
−
−2 000
−150
MAX.
+6.5
+7.5
VDD + 0.5
VLCD + 0.5
+10
+10
+50
500
10
+105
+150
150
+2 000
+150
Notes
1. Equivalent to discharging a 100 pF capacitor via a 1.5 kΩ series resistor (human body model).
2. Equivalent to discharging a 200 pF capacitor via a 0.75 µH series inductor (machine model).
UNIT
V
V
V
V
mA
mA
mA
mW
mW
°C
°C
°C
V
V
HANDLING
Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is
desirable to take normal precautions appropriate to handling MOS devices (see “Handling MOS Devices”).
1998 Jun 18
17