MPC106 Просмотр технического описания (PDF) - Motorola => Freescale

Номер в каталоге

Компоненты Описание

производитель

MPC106

PCI Bridge/Memory Controller

Motorola => Freescale 

Overview

In this document, the term ‘60x’ is used to denote a 32-bit microprocessor from the PowerPC architecture

family that conforms to the bus interface of the PowerPC 601™, PowerPC 603™, or PowerPC 604™

microprocessors. Note that this does not include the PowerPC 602™ microprocessor which has a

multiplexed address/data bus. 60x processors implement the PowerPC architecture as it is specified for

32-bit addressing, which provides 32-bit effective (logical) addresses, integer data types of 8, 16, and 32

bits, and floating-point data types of 32 and 64 bits (single-precision and double-precision).

To locate any published errata or updates for this document, refer to the website at

http://www.mot.com/SPS/PowerPC/.

1.1 Overview

The MPC106 provides an integrated high-bandwidth, high-performance, TTL-compatible interface

between a 60x processor, a secondary (L2) cache or additional (up to four total) 60x processors, the PCI

bus, and main memory. This section provides a block diagram showing the major functional units of the

106 and describes briefly how those units interact.

Figure 1 shows the major functional units within the 106. Note that this is a conceptual block diagram

intended to show the basic features rather than how these features are physically implemented on the

device.

Memory

Memory

Interface

L2 Cache

Interface

L2

Power Management

60x Processor

Interface

60x Bus

Error/Interrupt

Control

Target

Master

PCI Interface

Configuration

Registers

PCI Bus

Figure 1. Block Diagram

2

MPC106 PCI Bridge/Memory Controller Hardware Specifications

Share Link: