LC75863E Просмотр технического описания (PDF) - SANYO -> Panasonic
Номер в каталоге
Компоненты Описание
производитель
LC75863E Datasheet PDF : 24 Pages
| |||
LC75863E, 75863W
Output Data
1. KD1 to KD30 : Key data
When a key matrix of up to 30 keys is formed from the KS1 to KS6 output pins and the KI1 to KI5 input pins and
one of those keys is pressed, the key output data corresponding to that key will be set to 1. The table shows the
relationship between those pins and the key data bits.
KS1/S24
KS2/S25
KS3
KS4
KS5
KS6
KI1
KD1
KD6
KD11
KD16
KD21
KD26
KI2
KD2
KD7
KD12
KD17
KD22
KD27
KI3
KD3
KD8
KD13
KD18
KD23
KD28
KI4
KD4
KD9
KD14
KD19
KD24
KD29
KI5
KD5
KD10
KD15
KD20
KD25
KD30
When the KS1/S24 and KS2/S25 output pins are selected to be segment outputs by control data bits K0 and K1 and a
key matrix of up to 20 keys is formed using the KS3 to KS6 output pins and the KI1 to KI5 input pins, the KD1 to
KD10 key data bits will be set to 0.
2. SA : Sleep acknowledge data
This output data bit is set to the state when the key was pressed. Also, while DO will be low in this case, if serial data
is input and the mode is set (to normal or sleep mode) during this period, that mode will be set. SA will be 1 in sleep
mode and 0 in normal mode.
Sleep Mode Functions
Sleep mode is set up by setting S0 or S1 in the control data to 1. The segment outputs will all go low and the common
outputs will also go low, and the oscillator on the OSC pin will stop (it will be started by a key press). This reduces
power dissipation. This mode is cleared by sending control data with both S0 and S1 set to 0. However, note that the
S1/P1 to S4/P4 outputs can be used as general-purpose output ports according to the state of the P0 to P2 control data
bits, even in sleep mode. (See the control data description for details.)
No. 7135-11/24
Share Link: 