LC6514B
Fig. 7 Initial Reset Timing
τVDD : Power supply rise time constant
τRES : RES pin rise time constant
Fix C, R so that τVDD ≤τRES,tOSC≥10ms is
yielded. (tOSC : OSC stabilized time)
CR OSC characteristic of LC6514B
Fig. 8 shows the CR OSC characteristic of the LC6514B. For the variation range of CR OSC frequency of the
LC6514B, the following is guaranteed at external consatants of Cext=220pF, Rext=6.8kΩ only. The outgoing inspec-
tion is performed under this condition only.
600kHz≤fCROSC≤1220kHz
( ) Ta=–30°C to +70°C
VDD=4 to 6V
If any other constants than specified above are used, the range of Rext=5k to 50kΩ, Cext=100p to 300pF must be
observed. (See Fig. 8.)
Fig. 8 fCROSC. –Rext
Note 1. The OSC frequency at VDD=5V, Ta=25°C
must be 800KHz or less.
Note 2. The OSC frequency at VDD=4 to 6V,
Ta=–30 to +70°C must be within the
operation clock frequency range
(222KHz to 1290 kHz).
No.1802–8/17