DTL-IFB-485 Просмотр технического описания (PDF) - Murata Manufacturing

Номер в каталоге

Компоненты Описание

производитель

DTL-IFB-485

Interface Board for Serial-Input Electronic Loads

Murata Manufacturing 

InterfaceBoard for Serial-Input Electronic Loads

DTL-IFB-485

DTL-IFB-485 & “HyperTerminal”, cont'd

Hit Enter on the keyboard and the second “Auto Detect”

should immediately change to “9600 8-N-1” (see Figure 9).

Remove the jumpers and plug the connector back into the

DTL-IFB-485. It should now be operational. On exiting

HyperTerminal, it will prompt you to save this session and

you should respond - yes. In future when you select the

icon for this HyperTerminal configuration, it will

automatically start with the correct baud rate configured

and you will not have any further problem with auto detect.

Contact DATEL if any problems...a file 9600 Dumb.ht can

be provided that will contain the proper configuration setup.

Installing WinBurn™ DTLx485

Insert the WinBurn™ DTLx485 disk, and click on the setup.exe file

in /Windows Explorer...or go to Start, then Run and type

A:\setup.exe (or find Setup.exe with the Browse command).

8. The command syntax of the DTL-IFB-485 is very

specific and must be adhered to for satisfactory

operation. The microcontroller on board the DTL-IFB-485

has limited resources available for command parsing, so

it is up to the user to provide properly structured

command strings. All commands are case insensitive i.e.

a000_?r is the same as A000_?r or A000_?R. All

commands must be followed by a carriage return (ASCII

code 13) to execute. Refer to page 5 herein for the DTL-

IFB-485 command syntax to use when using the

HyperTerminal screen.

Utilizing WinBurn™ Active X Control

(DTLx485) with the DTL-IFB-485

Figure 12. Setup Screen Options

Most users will choose the "Typical" setup option. This installs all

the required system files with the actual application. The Compact

Setup option doesn't install certain system files with the application,

on the assumption that these files probably pre-exist in the users

Windows\system directory already (example: an application

running on a desktop, that has Visual Basic installed). This

provides avoids duplicating certain files, keeping the overall

application file as small as possible. Users who experience

problems in using a Compact Setup Install, should reinstall using

the Typical Setup option. The Custom option essentially allows the

user to pick from either the Typical (default) or Compact options.

Figure 11. DTLx485 ActiveX Control

Each shipment/lot of DTL-IFB-485 product receives an

installable WinBurn™ Active X component (DTLx485) on

3 1/2" diskettes. The control lets users provide simple

lines of code to send "behind the scenes" ASCII

commands to the DTL-IFB-485. The DTLx485 ActiveX

component speeds test and burn-in application

development, by letting users customize the user

graphical interface as needed. Utilizing higher-level,

graphical programming languages to control the ActiveX

component, allows engineers to then construct virtual

test and burn-in instrument programs with objects,

instead of lines of code.

Figure 13. DTLx485 ActiveX Control Custom Setup Screen

The install program will request the second disk, and then prompt the

user to Finish the install and exit, or to Launch the Application (not

setup to do this presently in Beta version 1.01).

11

Share Link: