ADSP-21469KBCZ-3(Rev0) Просмотр технического описания (PDF) - Analog Devices

Номер в каталоге

Компоненты Описание

производитель

ADSP-21469KBCZ-3
(Rev.:Rev0)

SHARC Processor

Analog Devices 

Target Board JTAG Emulator Connector

Analog Devices DSP Tools product line of JTAG emulators uses

the IEEE 1149.1 JTAG test access port of the ADSP-21469 pro-

cessors to monitor and control the target board processor

during emulation. Analog Devices DSP Tools product line of

JTAG emulators provides emulation at full processor speed,

allowing inspection and modification of memory, registers, and

processor stacks. The processor's JTAG interface ensures that

the emulator will not affect target system loading or timing.

For complete information on Analog Devices’ SHARC DSP

Tools product line of JTAG emulator operation, see the appro-

priate Emulator Hardware User's Guide.

DEVELOPMENT TOOLS

The ADSP-21469 processor is supported with a complete set of

CROSSCORE® software and hardware development tools,

including Analog Devices emulators and VisualDSP++® devel-

opment environment. The same emulator hardware that

supports other SHARC processors also fully emulates the

ADSP-21469 processors.

EZ-KIT Lite Evaluation Board

For evaluation of the processors, use the EZ-KIT Lite® board

being developed by Analog Devices. The board comes with on-

chip emulation capabilities and is equipped to enable software

development. Multiple daughter cards are available.

Designing an Emulator-Compatible DSP Board (Target)

The Analog Devices family of emulators are tools that every

DSP developer needs to test and debug hardware and software

systems. Analog Devices has supplied an IEEE 1149.1 JTAG

Test Access Port (TAP) on each JTAG DSP. Nonintrusive in-

circuit emulation is assured by the use of the processor’s JTAG

interface—the emulator does not affect target system loading or

timing. The emulator uses the TAP to access the internal fea-

tures of the processor, allowing the developer to load code, set

breakpoints, observe variables, observe memory, and examine

registers. The processor must be halted to send data and com-

mands, but once an operation has been completed by the

emulator, the DSP system is set running at full speed with no

impact on system timing.

To use these emulators, the target board must include a header

that connects the DSP’s JTAG port to the emulator.

For details on target board design issues including mechanical

layout, single processor connections, signal buffering, signal ter-

mination, and emulator pod logic, see the EE-68: Analog Devices

JTAG Emulation Technical Reference on the Analog Devices

website (www.analog.com)—use site search on “EE-68.” This

document is updated regularly to keep pace with improvements

to emulator support.

ADSP-21469

Evaluation Kit

Analog Devices offers a range of EZ-KIT Lite® evaluation plat-

forms to use as a cost effective method to learn more about

developing or prototyping applications with Analog Devices

processors, platforms, and software tools. Each EZ-KIT Lite

includes an evaluation board along with an evaluation suite of

the VisualDSP++® development and debugging environment

with the C/C++ compiler, assembler, and linker. Also included

are sample application programs, power supply, and a USB

cable. All evaluation versions of the software tools are limited

for use only with the EZ-KIT Lite product.

The USB controller on the EZ-KIT Lite board connects the

board to the USB port of the user’s PC, enabling the

VisualDSP++ evaluation suite to emulate the on-board proces-

sor in-circuit. This permits the customer to download, execute,

and debug programs for the EZ-KIT Lite system. It also allows

in-circuit programming of the on-board Flash device to store

user-specific boot code, enabling the board to run as a stand-

alone unit without being connected to the PC.

With a full version of VisualDSP++ installed (sold separately),

engineers can develop software for the EZ-KIT Lite or any cus-

tom defined system. Connecting one of Analog Devices JTAG

emulators to the EZ-KIT Lite board enables high speed, non-

intrusive emulation.

ADDITIONAL INFORMATION

This data sheet provides a general overview of the ADSP-21469

architecture and functionality. For detailed information on the

ADSP-21469 family core architecture and instruction set, refer

to the SHARC Processor Programming Reference.

RELATED SIGNAL CHAINS

A signal chain is a series of signal-conditioning electronic com-

ponents that receive input (data acquired from sampling either

real-time phenomena or from stored data) in tandem, with the

output of one portion of the chain supplying input to the next.

Signal chains are often used in signal processing applications to

gather and process data or to apply system controls based on

analysis of real-time phenomena. For more information about

this term and related topics, see the "signal chain" entry in

Wikipedia or the Glossary of EE Terms on the Analog Devices

website.

Analog Devices eases signal processing system development by

providing signal processing components that are designed to

work together well. A tool for viewing relationships between

specific applications and related components is available on the

www.analog.com website.

The Application Signal Chains page in the Circuits from the

LabTM site (http://www.analog.com/signalchains) provides:

• Graphical circuit block diagram presentation of signal

chains for a variety of circuit types and applications

• Drill down links for components in each chain to selection

guides and application information

• Reference designs applying best practice design techniques

Rev. 0 | Page 11 of 72 | June 2010

Share Link: