SMP75-8
Figure 12: Test circuit 3 for dynamic IH parameter
R
VBAT = - 48 V
D.U.T
Surge
generator
This is a GO-NOGO test which allows to confirm the holding current (IH) level in a
functional test circuit.
TEST PROCEDURE
1/ Adjust the current level at the IH value by short circuiting the AK of the D.U.T.
2/ Fire the D.U.T. with a surge current ➔ IPP = 10A, 10/1000µs.
3/ The D.U.T. will come back off-state within 50ms maximum.
Figure 12: Ordering Information Scheme
Trisil Surface Mount
Repetitive Peak Pulse Current
75 = 75A
Voltage
8 = 8V
SMP 75 - 8
6/8