2SC4673C Просмотр технического описания (PDF) - SANYO -> Panasonic
Номер в каталоге
Компоненты Описание
производитель
2SC4673C Datasheet PDF : 4 Pages
| |||
S parameters (Common emitter)
VCE=10V, IC=20mA, ZO=50Ω
Freq
(MHz)
100
200
400
600
800
900
1000
1200
MAG
0.414
0.372
0.364
0.369
0.379
0.366
0.388
0.399
S11
ANG
–112.1
–147.5
–175.7
170.1
158.7
153.6
148.5
140.5
VCE=10V, IC=40mA, ZO=50Ω
Freq
(MHz)
100
MAG
0.730
S11
ANG
–133.7
200
0.363
–161.5
400
0.366
177.6
600
0.371
166.7
800
900
1000
1200
0.380
0.389
0.391
0.404
156.9
153.1
148.3
141.3
2SC4673
S21
MAG
18.300
10.148
5.274
3.619
2.764
2.504
2.279
1.914
ANG
115.9
99.2
84.8
75.6
67.8
66.4
60.8
54.2
S12
MAG
0.024
0.037
0.064
0.093
0.123
0.139
0.152
0.184
ANG
61.1
66.4
72.9
75.3
76.6
75.4
75.1
74.0
S21
MAG
19.714
10.534
5.411
3.690
2.823
2.562
2.329
1.982
ANG
109.3
95.3
82.8
74.3
66.8
63.5
59.9
53.6
S12
MAG
ANG
0.021
66.4
0.035
72.5
0.064
77.3
0.094
77.9
0.125
77.3
0.142
76.8
0.155
76.1
0.186
74.7
S22
MAG
ANG
0.605
–26.4
0.492
–23.5
0.458
–23.0
0.460
–27.3
0.468
–32.6
0.475
–35.7
0.478
–38.5
0.487
–44.4
S22
MAG
ANG
0.535
–25.3
0.452
–20.6
0.438
–21.1
0.444
–25.9
0.454
–31.7
0.462
–35.1
0.465
–37.7
0.474
–43.8
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of January, 1999. Specifications and information herein are subject
to change without notice.
PS No.3927–4/4
Share Link: 