FAD8253
ELECTRICAL CHARACTERISTICS (continued)
(VBIAS (VDD, VBS) = 15 V, TA = −40°C to 125°C unless otherwise specified. The VIN and IIN parameters are referenced to VSS. The VO
and IO parameters are referenced to VS and COM and are applicable to the respective outputs HO and LO.)
Symbol
Parameter
Test Conditions
Min Typ Max Unit
FAULT DETECTION SECTION
VFOH
Fault Output High Level Voltage
VCSC = 0 V, RPULL−UP = 4.7 kW
4.7
−
−
V
VFOL
Fault Output Low Level Voltage
VCSC = 1 V, IFO = 2 mA
−
−
0.8
V
DYNAMIC OUTPUT SECTION
(VBIAS (VDD, VBS) = 15.0 V, TA = −40°C to 125°C, VS = VSS, CLOAD = 1000 pF unless otherwise specified.)
ton
toff
tSDOFF_LO
tSDOFF_HO
tr
tf
MtON
MtOFF
DT
Turn−on Propagation Delay (Note 7)
Turn−off Propagation Delay
SD to Low−side Propagation Delay
SD to How−side Propagation Delay
Turn−on Rise Time
Turn−off Fall Time
Delay Matching HO and LO Turn−On
Delay Matching HO and LO Turn−Off
Dead−time (Note 8)
VS = 0 V
VS = 0 V or 1200 V
65 100 145 ns
65
90 145 ns
25
45
70
ns
65
95 145 ns
−
13
25
ns
−
15
26
ns
−
−
25
ns
−
−
25
ns
70 120 200 ns
tUVFLT
tCSCFLT
tCSCFO
tFO
tCSCLO
Under−voltage Filtering Time (Note 6)
CSC Pin Filtering Time (Note 6)
Time from CSC Triggering to FO
Fault Output Pulse Width
Time from CSC Triggering to Low−side and
High−side Gate Output
From VCSC = 1 V to starting gate
turn−off
−
10
−
ms
−
300
−
ns
−
530 1250 ns
24
65 140 ms
−
600 1350 ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
6. Parameter guaranteed by design.
7. The turn−on propagation delay does not includes the dead time.
8. The dead time includes the turn on propagation time.
www.onsemi.com
6