24LLC02T Просмотр технического описания (PDF) - CERAMATE TECHNICAL

Номер в каталоге

Компоненты Описание

производитель

24LLC02T

2K-Bits Serial EEPROM For Low Power

CERAMATE TECHNICAL 

24LLC02

2K-Bits Serial EEPROM For Low Power

POLLING FOR AN ACK SIGNAL

When the master issues a stop condition to initiate a write cycle, the 24LLC02 starts an internal write cycle.

The master can then immediately begin polling for an ACK from the slave device.

To poll for an ACK signal in a write operation, the master issues a start condition followed by the slave address.

As long as the 24LLC02 remains busy with the write operation, no ACK is returned. When the 24LLC02

completes the write operation, it returns an ACK and the master can then proceed with the next read or write

operation (see Figure 1-11).

Send Write

Command

Send Stop Condition to

Initiate Write Cycle

Send Start

Condition

Send Slave Address

with R/ W bit = "0"

No

ACK = "0" ?

Yes

Start Next

Operation

Figure 1-11. Master Polling for an ACK Signal from a Slave Device

* All specs and applications shown above subject to change without prior notice.

1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN

Tel:886-3-3214525

Fax:886-3-3521052

Page 10 of 19

Email: server@ceramate.com.tw

Http: www.ceramate.com.tw

Rev 1.0 Dec. 26, 2001

Share Link: