OPI211 Просмотр технического описания (PDF) - TT Electronics.
Номер в каталоге
Компоненты Описание
производитель
OPI211 Datasheet PDF : 3 Pages
| |||
OPI210, OPI211
Features:
1kV electrical isolation
Miniature package ideal for surface mount applications
TTL, DTL compatible
High DC Current Transfer ratio
Description:
Each Optically coupled isolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN
silicon Photosensor. The OPI210 and OPI211 devices have 890 nm Light Emitting Diode (LED) and NPN
phototransistor and coupled on an FR-4 substrate. The devices are made with a sealed internal optically
transmissive path between the LED and the photosensor.
The OPI210 and OPI211 are identical except for the DC current transfer ratio. Both were designed with high
reliability in mind and are ideally suited for use in MIL-STD-883 applications. The devices may be mounted using
either silver or gold filled epoxies. The top of the device is covered with a silicone material and is very sensitive to
acetone type cleaning material.
This series is designed for transmission of information between one power supply voltage to another where the
potentials during surge conditions are not greater than the guaranteed isolation voltage.
Contact your local representative or OPTEK for more information.
Applications:
Military equipment
High-Reliability environments
High voltage isolation between input
and output
Electrical isolation in dirty
environments
Medical equipment
Office equipment
Part
Number
LED
Peak
Wavelength
OPI210
OPI211
890 nm
Ordering Information
Sensor
Isolation
Voltage
(,000)
CTR
Typical
200
Transistor
1
350
0.090 [2.29]
Collector (4)
Emitter (3)
IF (mA)
Typ / Max
VCE
(Volts)
Max
10 / 50
35
0.004 [0.10]
8 Places
OPI210, OPI211
1
3
0.090 [2.29]
Cathode (2)
2
4
RoHS
White Dot
Anode (1)
0.070 [1.78]
Pin #
1
2
LED
Anode
Cathode
Pin #
4
3
Transistor
Collector
Emitter
Anode (1)
0.025 [0.64]
Square 4 Places
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Issue B 09/2017 Page 1
Share Link: 