OPB818 Просмотр технического описания (PDF) - Optek Technology
Номер в каталоге
Компоненты Описание
производитель
OPB818 Datasheet PDF : 3 Pages
| |||
Slotted Optical Switch
OPB818
Features:
• Choice of aperture
• Choice of opaque or IR transmissive shell material
• Non-contact switching
• Mounts directly to PCBoard or dual-in-line socket
• 0.400” (10.16 mm) lead spacing
• 0.200” (5.08 mm) slot width. 0.250” (6.35 mm) slot depth
Product Photo Here
Description:
The OPB818 slotted switch consists of an infrared emitting diode and an NPN silicon phototransistor mounted in a
low-cost black plastic housing on opposite sides of a 0.200” (5.080 mm) wide slot. Switching of the phototransistor
occurs whenever an opaque object passes through the slot.
The OPB818Z is designed for direct soldering into PCBoards or for mounting in standard dual-in-line sockets and
has an 0.25” (6.35 mm) deep and 0.20” (5.08 mm) wide slot. The apertures are 0.06” (1.52 mm) in diameter on
both the sensor side (“S”) as well as on the emitter side (“E”).
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• Non-contact object sensing
• Assembly line automation
• Machine automation
• Equipment security
• Machine safety
Ordering Information
Part
Number
Description
Slotted Optical Switch
OPB818 (mounts directly to PCBoards
or to dual-in-line socket)
Pin # Description Pin # Description
1
Anode
3
Collector
2
Cathode
4
Emitter
1
3
2
4
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 01/07
Page 1 of 3
Share Link: 