PCF8564ACX9 Просмотр технического описания (PDF) - NXP Semiconductors.

Номер в каталоге

Компоненты Описание

производитель

PCF8564ACX9

Real time clock and calendar

NXP Semiconductors. 

NXP Semiconductors

PCF8564A

Real time clock and calendar

6. Read time registers to see the first change.

7. Apply 64 clock pulses to CLKOUT.

8. Read time registers to see the second change.

Repeat 7 and 8 for additional increments.

8.10 STOP bit function

The function of the STOP bit is to allow for accurate starting of the time circuits. The STOP

bit function will cause the upper part of the prescaler (F2 to F14) to be held in reset and

thus no 1 Hz ticks will be generated (see Figure 9). The time circuits can then be set and

will not increment until the STOP bit is released (see Figure 10 and Table 26).

OSCILLATOR STOP

DETECTOR

reset

ATOR

F0

F1

F2

RESET

F13

RESET

F14

RESET

1 Hz

STO

Fig 9. STOP bit functional diagram

1 Hz

32 Hz

1024 Hz

32768 Hz

CLKOUT source

013aa

The STOP bit function will not affect the output of 32.768 kHz on CLKOUT, but will stop

the generation of 1.024 kHz, 32 Hz and 1 Hz.

The lower two stages of the prescaler (F0 and F1) are not reset and because the I2C-bus

is asynchronous to the crystal oscillator, the accuracy of re-starting the time circuits will be

between zero and one 8.192 kHz cycle (see Figure 10).

8192 Hz

stop released

Fig 10. STOP bit release timing

0 μs to 122 μs

001aaf912

PCF8564A

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 02 — 30 September 2010

© NXP B.V. 2010. All rights reserved.

18 of 45

Share Link: