ISL85410 Просмотр технического описания (PDF) - Renesas Electronics
Номер в каталоге
Компоненты Описание
производитель
ISL85410 Datasheet PDF : 21 Pages
| |||
ISL85410
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest revision.
DATE
REVISION
CHANGE
March 13, 2015
FN8375.7
On page 1, updated all 36V references to 40V and replaced Figure 2.
On page 6, under “Absolute Maximum Ratings”
for VIN to GND updated max from “+42V” to “+43V”
for PHASE to GND updated max from “43V” to “+44V”
for EN to GND updated max from “+42V” to “+43V”
Under “Recommended Operating Conditions” updated supply voltage max from “36V” to “+40V”.
In “Electrical Specifications” updated all occurrences of VIN value from “36V” to “40V”.
Replaced Figure 9, on page 8.
On page 14, under “Detailed Description” section updated voltage range max from “+36V” to “+40V”.
August 28, 2014
FN8375.6 POD changed from L12.3x4 back to original L12.4x3.
July 24, 2014
FN8375.5
Changed title of Figure 13, on page 9 from “Efficiency vs Load, PWM, VOUT = 5V, L1 = 30µH” to “VOUT
Regulation vs Load, PWM, VOUT = 5V, L1 = 30µH”.
Replaced Figure Figure 46, on page 16.
Updated POD from L12.4x3 to L12.3x4
February 25, 2014
FN8375.4 “Power-On Reset” on page 14 changed 10µA to 2µA.
January 17, 2014
FN8375.3
“Functional Block Diagram” on page 5 changed Internal=50µs, External=230µs
to Internal=50µA/V, External=230µA/V and 600mA/Amp to 500mV/A
“Detailed Description” on page 14 changed 0.9A to 1.5A
“Power-On Reset” on page 14 changed 1µA to 10µA
“PWM Control Scheme” on page 14 changed in last paragraph 50µs vs 220µs to 50µA/V vs 230µA/V and
600mA/Amp to 500mV/A in 1st paragraph
“Overcurrent Protection” on page 15 changed 0.9A to 1.5A
November 22, 2013 FN8375.2 Initial Release.
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
© Copyright Intersil Americas LLC 2013-2015. All Rights Reserved.
All trademarks and registered trademarks are the property of their respective owners.
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such
modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are
current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its
subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN8375 Rev 7.00
March 13, 2015
Page 20 of 21
Share Link: 