LPS104-M Просмотр технического описания (PDF) - Artesyn Technologies
Номер в каталоге
Компоненты Описание
производитель
LPS104-M Datasheet PDF : 3 Pages
| |||
LPS100-M Series Data Sheet
Environmental Specifications
Operating temperature
0° to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C. -20 °C start up
Storage temperature
-40 °C to +85 °C
Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3
Humidity
Operating; non-condensing 10% to 95% RH
Vibration
IEC 60068-2-6 to the levels of IEC721-3-2
MTBF calculated
534,000 hours at full load and 25 °C ambient conditions, 230 V input, Bellcore
Ordering Information
Model Number
Output Voltage
Minimum
Load
Maximum Load with
Convection Cooling
LPS102-M
LPS103-M
LPS104-M
LPS105-M
LPS108-M
LPS109-M
5V
0A
12 V
0A
15 V
0A
24 V
0A
48 V
0A
54 V
0A
16 A
8.3 A
6.7 A
4.2A
2.1A
1.85 A
Maximum Load with
30CFM Forced Air
24 A
12.5 A
10 A
6.3 A
3.1 A
2.8 A
Peak Load Regulation2
30 A
14 A
11 A
7A
3.5 A
3.1 A
± 2%
± 2%
± 2%
± 2%
± 2%
± 2%
Ripple
P/P (PARD)3
50 mV
120 mV
150 mV
240 mV
480 mV
540 mV
1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.
2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be
operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to
OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users.
Pin Assignments
Connector
LPS100-M
SK1
Pin 1
Pin 3
SK2
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
SK203
Pin 1
Pin 2
Pin 3
Pin 4
SK5
Pin 1
Pin 2
Pin 3
Pin 4
Neutral
Line
Common
Common
Common
Common
+Vout
+Vout
+Vout
+Vout
Common
Power Fail
- Remote Sense
+ Remote Sense
+12 V Fan
+12 V Fan
Fan Return (Isolated)
Fan Return (Isolated)
Mating Connectors
AC Input (SK1) Molex P/N: 09-50-3031, Pins: 08-52-0072 or
Landwin P/N: 3060S0302, Pins: 3360T011P
AC Ground
Molex: 01-90020001
DC Output
(SK2)
Molex P/N: 09-50-3081, Pins: 08-52-0072or
Landwin P/N: 3060S0802, Pins: 3360T011P
Remote Sense Molex P/N: 35155-0400, Pins: 08-70-0056 or
(SK203)
Landwin P/N: 2640S04A0, Pins: 2543T011P
Fan: (SK5)
Molex P/N: 22-01-1042, Pins: 08-70-0049 or
Landwin: P/N: 2510S04A0, Pins: 2543T011P
Artesyn Embedded Technologies Connector Kit #70-841-025,
includes all of the above
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ±.02”.
3. Mounting holes M1, M2 should be grounded for EMI purpose
4. Mounting M1 is safety ground connection
5. Specifications are for convection rating at factory settings at 115
Vac input 25 °C unless otherwise stated.
6. This power supply requires mounting on metal standoffs 0.20”
(5 m) in height.
7. For DC input an external DC safety rated fuse must be used.
8. Warranty: 2 years
9. Weight: 0.44 lb. / 0.20 kg
Share Link: 