XL1002-BD Просмотр технического описания (PDF) - M/A-COM Technology Solutions, Inc.

Номер в каталоге

Компоненты Описание

производитель

XL1002-BD

Low Noise Amplifier 20.0-36.0 GHz

M/A-COM Technology Solutions, Inc. 

XL1002-BD

Low Noise Amplifier

20.0-36.0 GHz

App Note [1] Biasing - As shown in the bonding diagram, this

device operates using a self-biased architecture and only re-

quires a single bias voltage. All DC pads (V1 through V8) are

tied together on-chip, even though V1 or V5 are shown as main

connections, any of the eight DC pads may be used to bias the

device. Bias is nominally V1 or V5=5V, Id=85 mA.

App Note [2] Bias Arrangement - The DC pad at the top (V1)

should be connected to one DC bypass capacitor (~100-200 pf)

and the DC pad at the bottom (V5) should be connected using

another DC bypass capacitor (~100-200 pf). Additional DC by-

pass capacitance (~0.01 pf) is also recommended. Capaci-

tance should be as close to the device as possible.

Rev. V1

9

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Share Link: