PWR1100C Просмотр технического описания (PDF) - Murata Power Solutions
Номер в каталоге
Компоненты Описание
производитель
PWR1100C Datasheet PDF : 4 Pages
| |||
PWR11xxC
1.5 Watt Unregulated Dual-in-Line DC/DC Converter
ABSOLUTE MAXIMUM RATINGS
Output Short-Circuit Duration ........................................................................ Momentary
Internal Power Dissipation...................................................................................750mW
ORDERING INFORMATION
Device Family
PWR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
RoHS Compliant
PWR 11XX C
APPLICATION NOTE
UNBALANCED LOADS
Unbalanced loads may be used on dual output models with
either side providing up to its rated current. Output voltages,
by design, will track each other in an unbalanced state within
±10% of one another.
OUTPUT NOISE
Output noise can be reduced to 30mVp-p, typically, by adding
a 10μF tantalum capacitor with an equivalent series resistance
(ESR) of less than 150mΩ at 10kHz across each output.
THROUGH-HOLE SOLDERING INFORMATION
These devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds.
Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should
be taken to control manual soldering limits identical to that of wave soldering.
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_PWR11xxC.B01 Page 3 of 4
Share Link: 