TSOP39536 Просмотр технического описания (PDF) - Vishay Semiconductors
Номер в каталоге
Компоненты Описание
производитель
TSOP39536 Datasheet PDF : 7 Pages
| |||
New Product
TSOP381.., TSOP383.., TSOP385.., TSOP391.., TSOP393..,
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against EMI
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
19026
• Insensitive to supply voltage ripple and noise
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Pinning for TSOP381.., TSOP383.., TSOP385..:
1 = OUT, 2 = GND, 3 = VS
Pinning for TSOP391.., TSOP393.., TSOP395..:
1 = OUT, 2 = VS, 3 = GND
Please see the document “Product Transition Schedule” at
www.vishay.com/ir-receiver-modules/ for up-to-date info,
when this product will be released.
DESCRIPTION
These products are miniaturized receivers for infrared
remote control systems. A PIN diode and a preamplifier are
assembled on a lead frame, the epoxy package acts as an
IR filter.
The demodulated output signal can be directly decoded
by a microprocessor. The TSOP381.., TSOP391.. are
compatible with all common IR remote control data formats.
The TSOP383.., TSOP393.. are optimized to better
suppress spurious pulses from energy saving fluorescent
lamps. The TSOP385.., TSOP395.. have an excellent noise
suppression. It is immune to dimmed LCD backlighting and
any fluorescent lamps. AGC3 and AGC5 may also suppress
some data signals in case of continuous transmission.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
CARRIER
FREQUENCY
30 kHz
SHORT BURST AND HIGH DATA
RATE (AGC1)
1 = OUT,
2 = GND, 3 = VS
TSOP38130
1 = OUT,
2 = VS, 3 = GND
TSOP39130
33 kHz
TSOP38133
TSOP39133
36 kHz
TSOP38136
TSOP39136
38 kHz
TSOP38138
TSOP39138
40 kHz
TSOP38140
TSOP39140
56 kHz
TSOP38156
TSOP39156
NOISY ENVIROMENTS AND SHORT
BURST (AGC3)
PINNING
1 = OUT,
2 = GND, 3 = VS
TSOP38330
1 = OUT,
2 = VS, 3 = GND
TSOP39330
TSOP38333
TSOP39333
TSOP38336
TSOP39336
TSOP38338
TSOP39338
TSOP38340
TSOP39340
TSOP38356
TSOP39356
VERY NOISY ENVIROMENTS AND
SHORT BURSTS (AGC5)
1 = OUT,
2 = GND, 3 = VS
TSOP38530
TSOP38533
TSOP38536
TSOP38538
TSOP38540
TSOP38556
1 = OUT,
2 = VS, 3 = GND
TSOP39530
TSOP39533
TSOP39536
TSOP39538
TSOP39540
TSOP39556
BLOCK DIAGRAM
16833-13
3
30 kΩ
1
Input
AGC
Band
pass
Demo-
dulator
APPLICATION CIRCUIT
17170_5
Transmitter IR receiver
with
TSALxxxx
VS
OUT
GND
R1
C1
VO
+ VS
µC
GND
PIN
Rev. 1.0, 07-May-12
Control circuit
2
R1 and C1 are recommended for protection against EOS.
Components should be in the range of 33 Ω < R1 < 1 kΩ,
C1 > 0.1 µF.
1
Document Number: 81743
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 