SMT10E-05W3V3J Просмотр технического описания (PDF) - Emerson Network Power
Номер в каталоге
Компоненты Описание
производитель
SMT10E-05W3V3J Datasheet PDF : 4 Pages
| |||
Embedded Power for
Business-Critical Continuity
Ordering Information
All specifications are typical at 5 Vin and 3.3 Vout, full load at 25 °C unless otherwise stated.
Ordering Information
Output
Input Voltage Output Voltage
Power (Max.)
13.2 W
3.0 - 5.5 Vdc
1.2 Vdc
16.5 W
3.0 - 5.5 Vdc
1.5 Vdc
19.8 W
3.0 - 5.5 Vdc
1.8 Vdc
27.5 W
3.0 - 5.5 Vdc
2.5 Vdc
36.3 W
4.5 - 5.5 Vdc
3.3 Vdc
36.3 W
3.0 - 5.5 Vdc 0.8 - 3.63 Vdc
Output Currents
Min
Max
0A
10 A
0A
10 A
0A
10 A
0A
10 A
0A
10 A
0A
10 A
Efficiency
(typ.)
89%
90%
92%
95%
96%
96%
Regulation
Line
Load
±0.2%
±1.0%
±0.2%
±1.0%
±0.2%
±1.0%
±0.2%
±1.0%
±0.2%
±1.0%
±0.2%
±1.0%
Rev.3.4.09_90
SMT10E_05 Series
3 of 4
Model Numbers (2, 4, 5)
SMT10E-05S1V2J (EOL)
SMT10E-05S1V5J (EOL)
SMT10E-05S1V8J (EOL)
SMT10E-05S2V5J (EOL)
SMT10E-05S3V3J (EOL)
SMT10E-05W3V3J
Part Number System with Options
SMT10E-05S3V3J
Product Family
SMT = Surface-mount
Packaging Options (4)
J = Pb-free (RoHS 6/6 compliant)
Rated Output Current
10 = 10 Amps
Performance
E = Enhanced Performance
Output Voltage
1V2 = 1.2 V, 1V5 = 1.5 V, 1V8 = 1.8 V,
2V5 = 2.5 V, 3V3 = 3.3 V
Type of Output
S = Single
W = Wide
Input Voltage
05 = 3.0 Vdc to 5.5 Vdc
Output Voltage Adjustment of the SMT10E-05W3V3J Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT10E-05W3V3J. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT10E-05W3V3J converter
leaves the factory the output has been adjusted to the default voltage of 3.3V.
• When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc
• When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc
Notes
1 When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc.
When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc.
2 The SMT10E features a ‘Negative Logic’ Remote ON/OFF operation. If
not using the Remote ON/OFF pin, leave the pin open (the converter will be
on). The Remote ON/OFF pin is referenced to ground.
The following conditions apply for the SMT10E:
Configuration
Operation
Remote pin open circuit
Remote pin pulled low
Remote pin pulled high [Von/off >1.2 V]
Converter
Unit is ON
Unit is ON
Unit is OFF
A ‘Positive Logic’ Remote ON/OFF version is also possible with this
converter. To order please place the suffix ‘-R’ at the end of the model
number, e.g. SMT10E-05W3V3-RJ.
Notes Continued
3 Full derating curves available in both the Longform Datasheet and
Application Note 168.
4 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special
request, please contact your local sales representative for details.
5 NOTICE: Some models do not support all options. Please contact your
local Emerson Network Power representative or use the on-line model
number search tool at http://www.PowerConversion.com to find a suitable
alternative.
Share Link: 