Pin Functions
Pin No.
Pin
LA75676V-S
Function
Equivalent circuit
SIF input
The input impedance is about 1 kΩ.
Since interference signals* entering this input can
result in buzzing and beat signals, the pattern layout
1
SIF input
for the signal input to this pin must be designed
carefully.
*: Signals that can interfere with audio include video
and chrominance signals. Thus the VIF carrier
signal can cause interference.
1kΩ
1kΩ
1
A13269
4.2V
The FM detector signal-to-noise ratio can be improved
by inserting a filter in the FM detector bias line.
C1 must be 0.47 µF or higher, and we recommend
2
FM power supply filter 1 µF.
If the FM detector is not used, a 2 kΩ resistor must be
inserted between pin 2 and ground. This stops the FM
detector VCO circuit.
10kΩ
4kΩ
2
C1
TO VCO BIAS
14kΩ
A13270
Outputs the intercarrier detector output that has been
3
SIF out
passed through a high-pass filter.
(4.5 MHz output)
4
NC
This pin should be left open.
5
VCC
Use lines that are as short as possible for VCC/ground
decoupling.
200Ω
3
A13271
Continued on next page.
No. 6277-7/13