EBS11RC4ACNA
Electrical Specifications
• All voltages are referenced to VSS (GND).
Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Note
Voltage on any pin relative to VSS
Supply voltage relative to VSS
VT
VDD
–0.5 to VDD + 0.5
(≤ 4.6 (Max))
V
–0.5 to +4.6
V
Short circuit output current
IOS
50
mA
Power dissipation
PD
36.0
W
Operating temperature
TA
0 to +70
°C
1
Storage temperature
Tstg
–55 to +125
°C
Notes: 1. SDRAM device specification
Caution Exposing the device to stress above those listed in Absolute Maximum Ratings could cause
permanent damage. The device is not meant to be operated under conditions outside the
limits described in the operational section of this specification Exposure to Absolute
Maximum Rating conditions for extended periods may affect device reliability.
DC Operating Conditions (TA = 0 to +70°C) (SDRAM device specification)
Parameter
Symbol
min.
max.
Unit
Note
Supply voltage
VDD
3.0
3.6
V
1
VSS
0
0
V
2
Input high voltage
VIH
2.0
VDD + 0.3 V
3
Input low voltage
VIL
–0.3
0.8
V
4
Ambient illuminance
—
—
100
lx
Notes: 1. The supply voltage with all VDD pins must be on the same level.
2. The supply voltage with all VSS pins must be on the same level.
3. VIH (max.) = VDD + 2.0V for pulse width ≤ 3ns at VDD.
4. VIL (min.) = VSS − 2.0V for pulse width ≤ 3ns at VSS.
DC Characteristics 1 (TA = 0 to 70°C, VDD = 3.3V ± 0.3V, VSS = 0V)
Parameter
Operating current
Symbol
ICC1
Grade min.
-7A
—
max.
Unit
3575
mA
ICC1
-75
—
Standby current in power
down
ICC2P
—
Standby current in non power
down
ICC2N
—
Active standby current in
power down
ICC3P
—
Active standby current in non
power down
ICC3N
—
Burst operating current
ICC4
—
Refresh current
ICC5
-7A
—
3215
mA
803
mA
1415
mA
839
mA
1775
mA
3575
mA
5735
mA
ICC5
-75
5195
mA
Self refresh current
ICC6
—
803
mA
Test condition
Burst length = 1
tRC = tRC (min.)
Notes
1, 2, 3
CKE = VIL, tCK = 12ns
CKE, /CS = VIH,
tCK = 12ns
CKE = VIL, tCK = 12ns
CKE, /CS = VIH,
tCK = 12ns
tCK = tCK (min.), BL = 4
tRC = tRC (min.)
6
4
1, 2, 6
1, 2, 4
1, 2, 5
3
VIH ≥ VDD – 0.2V
VIL ≤ 0.2V
7
Data Sheet E0106E30 (Ver. 3.0)
8