CF5010DN1-1 Просмотр технического описания (PDF) - Nippon Precision Circuits
Номер в каталоге
Компоненты Описание
производитель
CF5010DN1-1 Datasheet PDF : 25 Pages
| |||
SM5010 series
FUNCTIONAL DESCRIPTION
Standby Function
5010AH×, AK×, AN×, BH×, BK×, BN×, DN×, FN×, FH×, HN×, HK× series
When INHN goes LOW, the output on Q becomes high impedance, but internally the oscillator does not stop.
5010CL× series
When INHN goes LOW, the oscillator stops and the oscillator output on Q becomes high impedance.
5010EA× series
When INHN goes LOW, the oscillator stops and the oscillator output on Q becomes LOW.
Version
AH×, AK×, AN×, BH×,
BK×, BN×, DN×, FH×,
FH×, HN×, HK× series
CL× series
EA× series
INHN
HIGH (or open)
LOW
HIGH (or open)
LOW
HIGH (or open)
LOW
Q
Any fO, fO/2, fO/4, fO/8 or fO/16 output frequency
High impedance
Any fO, fO/2, fO/4, fO/8 or fO/16 output frequency
High impedance
Either fO or fO/2 output frequency
LOW
Oscillator
Normal operation
Normal operation
Normal operation
Stopped
Normal operation
Stopped
Power-saving Pull-up Resistor (CL series only)
The INHN pull-up resistance changes in response to the input level (HIGH or LOW). When INHN goes LOW
(standby state), the pull-up resistance becomes large to reduce the current consumption during standby.
SEIKO NPC CORPORATION —5
Share Link: 