ISL60002CAH333Z-TK Просмотр технического описания (PDF) - Renesas Electronics
Номер в каталоге
Компоненты Описание
производитель
ISL60002CAH333Z-TK Datasheet PDF : 40 Pages
| |||
ISL60002
Absolute Maximum Ratings
Maximum Voltage VIN to GND. . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.5V
Maximum Voltage VOUT to GND (10s) . . . . . . . . . . . . . . -0.5V to +VOUT + 1V
Voltage on “DNC” Pins . . . . . . . . . .No connections permitted to these pins
ESD Ratings
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5500V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550V
Charged Device Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2kV
Environmental Operating Conditions
X-Ray Exposure (Note 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mRem
Thermal Information
Thermal Resistance (Typical)
JA (°C/W) JC (°C/W)
3 Ld SOT-23 (Notes 7, 8) . . . . . . . . . . . . . . . 275
110
Continuous Power Dissipation (TA = +85°C) . . . . . . . . . . . . . . . . . . . 99mW
Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . .+107°C
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB493
Recommended Operating Conditions
Temperature Range
Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
3.3V Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +105°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
6. Measured with no filtering, distance of 10” from source, intensity set to 55kV and 70µA current, 30s duration. Other exposure levels should be
analyzed for Output Voltage drift effects. See “Applications Information” on page 34.
7. JA is measured with the component mounted on a high-effective thermal conductivity test board in free air. See TB379 for details.
8. For JC, the “case temp” location is taken at the package top center.
9. Post-reflow drift for the ISL60002 devices will range from 100µV to 1.0mV based on experimental results with devices on FR4 double-sided boards.
The design engineer must take this into account when considering the reference voltage after assembly.
10. Post-assembly X-ray inspection may also lead to permanent changes in device output voltage and should be minimized or avoided. Initial accuracy
can change 10mV or more under extreme radiation. Most inspection equipment will not affect the FGA reference voltage, but if X-ray inspection is
required, it is advisable to monitor the reference output voltage to verify excessive shift has not occurred.
Electrical Specifications ISL60002-10, VOUT = 1.024V (Additional specifications on page 9, “Common Electrical
Specifications”). Operating conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to +85°C, unless otherwise specified. Boldface limits apply
across the operating temperature range, -40°C to +85°C.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 11) TYP (Note 11) UNIT
Output Voltage
VOUT Accuracy (Notes 10, 12)
VOUT
VOA
TA = +25°C
ISL60002B10
1.024
V
-1.0
1.0
mV
ISL60002C10
-2.5
2.5
mV
ISL60002D10
-5.0
5.0
mV
Input Voltage Range
VIN
2.7
5.5
V
Electrical Specifications ISL60002-11, VOUT = 1.200V (Additional specifications on page 9, “Common Electrical
Specifications”). Operating conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to +85°C, unless otherwise specified. Boldface limits apply
across the operating temperature range, -40°C to +85°C.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 11) TYP (Note 11)
UNIT
Output Voltage
VOUT Accuracy (Note 12)
VOUT
VOA
TA = +25°C
ISL60002B11
1.200
V
-1.0
1.0
mV
ISL60002C11
-2.5
2.5
mV
ISL60002D11
-5.0
5.0
mV
Input Voltage Range
VIN
2.7
5.5
V
FN8082 Rev 22.00
Mar 9, 2018
Page 5 of 40
Share Link: 