A14100 Просмотр технического описания (PDF) - Microsemi Corporation

Номер в каталоге

Компоненты Описание

производитель

A14100

Accelerator Series FPGAs – ACT 3 Family

Microsemi Corporation 

1 – ACT 3 Family Overview

General Description

Microsemi’s ACT 3 Accelerator Series of FPGAs offers the industry’s fastest high-capacity

programmable logic device. ACT 3 FPGAs offer a high performance, PCI compliant programmable

solution capable of 186 MHz on-chip performance and 9.0 nanosecond clock-to-output (–1 speed grade),

with capacities spanning from 1,500 to 10,000 gate array equivalent gates.

The ACT 3 family builds on the proven two-module architecture consisting of combinatorial and

sequential logic modules used in Microsemi’s 3200DX and 1200XL families. In addition, the ACT 3 I/O

modules contain registers which deliver 9.0 nanosecond clock-to-out times (–1 speed grade). The

devices contain four clock distribution networks, including dedicated array and I/O clocks, supporting

very fast synchronous and asynchronous designs. In addition, routed clocks can be used to drive high

fanout signals such as flip-flop resets and output.

The ACT 3 family is supported by Microsemi’s Designer Series Development System which offers

automatic placement and routing (with automatic or fixed pin assignments), static timing analysis, user

programming, and debug and diagnostic probe capabilities.

Accumulators (16-Bit)

47 MHz

Loadable Counters (16-Bit)

82 MHz

Prescaled Loadable Counters (16-Bit)

Shift Registers

186 MHz

186 MHz

Figure 1-1 • Predictable Performance (worst-case commercial, –1 speed grade)

System Performance Model

Chip #1 I/O Module

Chip #2 I/O Module

I/O CLK

tCKHS

35 pF

tTRACE

I/O CLK

tINSU

Revision 3

1-1

Share Link: