AD676JDZ Просмотр технического описания (PDF) - Analog Devices

Номер в каталоге

Компоненты Описание

производитель

AD676JDZ

16-Bit 100 kSPS Sampling ADC

Analog Devices 

AD676

ORDERING GUIDE

Model

Temperature Range1

S/(N+D)

Package

Max INL Package Description Option2

AD676JD

AD676KD

AD676AD

AD676BD

0°C to +70°C

0°C to +70°C

–40°C to +85°C

–40°C to +85°C

85 dB

87 dB

85 dB

87 dB

± 1.5 LSB

± 1.5 LSB

Ceramic 28-Pin DIP

Ceramic 28-Pin DIP

Ceramic 28-Pin DIP

Ceramic 28-Pin DIP

D-28

D-28

D-28

D-28

NOTES

1For details on grade and package offerings screened in accordance with MIL-STD-883, refer to the AD676/883 data sheet.

2D = Ceramic DIP.

ABSOLUTE MAXIMUM RATINGS*

VCC to VEE . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +26.4 V

VDD to DGND . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V

VCC to AGND . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +18 V

VEE to AGND . . . . . . . . . . . . . . . . . . . . . . . . –18 V to +0.3 V

AGND to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 0.3 V

Digital Inputs to DGND . . . . . . . . . . . . . . . . . . 0 V to +5.5 V

Analog Inputs, VREF to AGND

. . . . . . . . . . . . . . . . . . . . . . . (VCC + 0.3 V) to (VEE – 0.3 V)

Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C, 10 sec

Storage Temperature . . . . . . . . . . . . . . . . . . –65°C to +150°C

*Stresses greater than those listed under “Absolute Maximum Ratings” may cause

permanent damage to the device. This is a stress rating only and functional

operation of the device at these or any other conditions above those indicated in

the operational section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability.

CAUTION

The AD676 features input protection circuitry consisting of large “distributed” diodes and

polysilicon series resistors to dissipate both high energy discharges (Human Body Model) and fast,

low energy pulses (Charged Device Model). Per Method 3015.2 of MIL-STD-883C, the AD676

has been classified as a Category 1 Device.

Proper ESD precautions are strongly recommended to avoid functional damage or performance

degradation. Charges as high as 4000 volts readily accumulate on the human body and test

equipment, and discharge without detection. Unused devices must be stored in conductive foam

or shunts, and the foam discharged to the destination socket before devices are removed. For further

information on ESD Precaution. Refer to Analog Devices’ ESD Prevention Manual.

WARNING!

ESD SENSITIVE DEVICE

REV. A

–5–

Share Link: