IDT72V36100_16 Просмотр технического описания (PDF) - Integrated Device Technology
Номер в каталоге
Компоненты Описание
производитель
IDT72V36100_16 Datasheet PDF : 48 Pages
| |||
IDT72V36100/72V36110 3.3V HIGH DENSITY SUPERSYNC IITM 36-BIT FIFO
65,536 x 36 and 131,072 x 36
COMMERCIAL AND INDUSTRIAL
TEMPERATURE RANGES
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED DC OPERATING
Symbol
Rating
Com’l & Ind’l
Unit
CONDITIONS
VTERM(2)
Terminal Voltage
–0.5 to +4.5
V
with respect to GND
TSTG
Storage
Temperature
–55 to +125
°C
IOUT
DC Output Current
–50 to +50
mA
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminal only.
Symbol
Parameter
Min. Typ.
VCC(1) Supply Voltage Com’l/Ind’l
3.15 3.3
GND Supply Voltage Com’l/Ind’l
0
0
VIH(2) Input High Voltage Com’l/Ind’l 2.0
—
VIL(3) Input Low Voltage Com’l/Ind’l —
—
TA
Operating Temperature
Commercial
0
—
TA
Operating Temperature
Industrial
-40 —
NOTES:
1. VCC = 3.3V ± 0.15V, JEDEC JESD8-A compliant.
2. Outputs are not 5V tolerant.
3. 1.5V undershoots are allowed for 10ns once per cycle.
Max. Unit
3.45 V
0V
5.5 V
0.8 V
70 °C
85 °C
DC ELECTRICAL CHARACTERISTICS
(Commercial: VCC = 3.3V ± 0.15V, TA = 0°C to +70°C;Industrial: VCC = 3.3V ± 0.15V, TA = -40°C to +85°C; JEDEC JESD8-A compliant)
IDT72V36100L
IDT72V36110L
Commercial and Industrial(1)
tCLK = 6, 7-5, 10, 15 ns
Symbol
Parameter
Min.
Max.
Unit
ILI(2)
Input Leakage Current
–1
1
µA
ILO(3)
Output Leakage Current
–10
10
µA
VOH
Output Logic “1” Voltage, IOH = –2 mA
2.4
—
V
VOL
Output Logic “0” Voltage, IOL = 8 mA
—
0.4
V
ICC1(4,5,6)
Active Power Supply Current
—
40
mA
ICC2(4,7)
Standby Current
—
15
mA
NOTES:
1. Industrial temperature range product for the 7-5ns and 15ns speed grade are available as a standard device. All other speed grades are available by special order.
2. Measurements with 0.4 ≤ VIN ≤ VCC.
3. OE ≥ VIH, 0.4 ≤ VOUT ≤ VCC.
4. Tested with outputs open (IOUT = 0).
5. RCLK and WCLK toggle at 20 MHz and data inputs switch at 10 MHz.
6. Typical ICC1 = 4.2 + 1.4*fS + 0.002*CL*fS (in mA) with VCC = 3.3V, tA = 25°C, fS = WCLK frequency = RCLK frequency (in MHz, using TTL levels), data switching at fS/2,
CL = capacitive load (in pF).
7. All Inputs = VCC - 0.2V or GND + 0.2V, except RCLK and WCLK, which toggle at 20 MHz.
CAPACITANCE (TA = +25°C, f = 1.0MHz)
Symbol
Parameter(1)
Conditions
Max.
CIN(2)
Input
VIN = 0V
10
Capacitance
COUT(1,2)
Output
VOUT = 0V
10
Capacitance
NOTES:
1. With output deselected, (OE ≥ VIH).
2. Characterized values, not currently tested.
Unit
pF
pF
8
Share Link: 