SPT7721 Просмотр технического описания (PDF) - Signal Processing Technologies

Номер в каталоге

Компоненты Описание

производитель

SPT7721

No description available.

Signal Processing Technologies 

POWER DOWN MODE

DIGITAL OUTPUTS

To save on power, the SPT7721 incorporates a power-

down function. This function is controlled by the signal on

pin PD. When pin PD is set high, the SPT7721 enters the

power-down mode. All outputs are set to high impedance.

In the power-down mode the SPT7721 dissipates 10 mW

typically.

The output circuitry of the SPT7721 has been designed to

be able to support three separate output modes. The

demuxed (double-wide) mode supports either parallel

aligned or interleaved data output. The single-channel

mode is not demuxed and can support direct output at

speeds up to 125 MSPS.

REFERENCES

To save on parts count, design time, and PC board real

estate, the SPT7721 utilizes an internal reference. No

other external components are required to implement this

feature.

COMMON MODE VOLTAGE REFERENCE CIRCUIT

The SPT7721 has an on-board common-mode voltage

reference circuit (VCM). It is 2.5 volts and is capable of driv-

ing 50 µA loads typically. The circuit is commonly used to

drive the center tap of the RF transformer in fully differen-

tial applications. For single-ended applications, this output

can be used to provide the level shifting required for the

single-to-differential converter conversion circuit.

CLOCK INPUT

The clock input on the SPT7721 can be driven by either a

single-ended or double-ended clock circuit and can handle

TTL, PECL, and CMOS signals. When operating at high

sample rates it is important to keep the pulse width of the

clock signal as close to 50% as possible. For TTL/CMOS

single-ended clock inputs, the rise time of the signal also

becomes an important consideration.

The data output mode is set using the DMODE1 and

DMODE2 inputs (pins 32 & 31 respectively). Table I

describes the mode switching options.

Table I – Output Data Modes

Output Mode

Parallel Dual Channel Output

DMODE1

0

Interleaved Dual Channel Output 0

Single Channel Data Output

(Bank A only 125 MSPS max)

1

DMODE2

0

1

X

EVALUATION BOARD

The EB7721 evaluation board is available to aid designers

in demonstrating the full performance of the SPT7721.

This board includes a clock driver and reset circuit, adjust-

able references and common mode, a single-ended to dif-

ferential input buffer and a single-ended to differential

transformer (1:1). An application note (AN7721) describ-

ing the operation of this board, as well as information on

the testing of the SPT7721, is also available. Contact the

factory for price and availability of the EB7721.

SPT

9

SPT7721

2/20/01

Share Link: