DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

CP1-12V_13 Просмотр технического описания (PDF) - Panasonic Corporation

Номер в каталоге
Компоненты Описание
производитель
CP1-12V_13
Panasonic
Panasonic Corporation Panasonic
CP1-12V_13 Datasheet PDF : 5 Pages
1 2 3 4 5
CP
RATING
1. Coil data
Nominal coil
voltage
12V DC
Pick-up voltage
(at 20°C 68°F)
Max. 7.2V DC
(Initial)
Drop-out voltage
(at 20°C 68°F)
Min. 1.0V DC
(Initial)
Nominal operating
current
[±10%] (at 20°C 68°F)
53.3 mA
Note: Other pick-up voltage types are also available. Please contact us for details.
Coil resistance
[±10%] (at 20°C 68°F)
225
Nominal operating
power
(at 20°C 68°F)
640 mW
Usable voltage range
(at 85°C 185°F)
10 to 16V DC
2. Specifications
1) Standard CP relay
Characteristics
Contact
Item
Arrangement
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Rating
Electrical
characteristics
Mechanical
characteristics
Max. carrying current (12V DC initial)*3
Nominal operating power
Min. switching capacity (resistive load)*1
Insulation resistance (Initial)
Breakdown voltage Between open contacts
(Initial)
Between contacts and coil
Operate time (at nominal voltage)
Release time (at nominal voltage)
Shock resistance
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical
Expected life
Electrical*4
Conditions
Mass
Conditions for operation, transport and storage*2
Max. operating speed
Specifications
1 Form A
1 Form C
N.O.: Typ6m, N.C.: Typ8m(By voltage drop 6V DC 1A)
Ag alloy (Cadmium free)
20A 14V DC
N.O.: 20A 14V DC, N.C.: 10A 14V DC
N.O.: 40A for 2 minutes, 30A for 1 hour (at 20°C 68°F)
35A for 2 minutes, 25A for 1 hour (at 85°C 185°F)
640 mW
1A 14V DC
Min. 100 M(at 500V DC, Measurement at same location as “Breakdown voltage” section.)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 10ms (at 20°C 68°F, excluding contact bounce time) (Initial)
Max. 10ms (at 20°C 68°F, excluding contact bounce time) (Initial)
Min. 100 m/s2 {10G} (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6ms)
10 Hz to 100 Hz, Min. 44.1 m/s2 {4.5G} (Detection time: 10µs)
10 Hz to 500 Hz, Min. 44.1 m/s2 {4.5G}
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 cpm)
<Resistive load>
Min. 105 (At nominal switching capacity, operating frequency: 1s ON, 9s OFF)
<Motor load>
Min. 2×105 (N.O. side, Inrush 25A, steady 5A at 14V DC)
Min. 105 (N.O. side, 20A 14V DC at motor lock)
Min. 2×105 (N.C. side, 20A 14V DC at brake current) (Operating frequency: 0.5s ON, 9.5s OFF)
Ambient temp: –40°C to +85°C –40°F to +185°F
Humidity: 5% R.H. to 85% R.H. (Not freezing and condensing at low temperature)
6 cpm (at rated load)
Approx. 4g .14 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Please refer to “Usage ambient
condition” in CAUTIONS FOR USE OF AUTOMOTIVE RELAYS.
Please inquire if you will be using the relay in a high temperature atmosphere (110°C 230°F).
*3. Depends on connection conditions. Also, this does not guarantee repeated switching. We recommend that you confirm operation under actual conditions.
*4. Motor load does not apply to wiper load applications.
2) For wiper load (CP1W-12V)
Anything outside of that given below complies with standard CP relays.
Characteristics
Item
Rating
Max. carrying current (12V DC initial)*1
Expected life Electrical
Specifications
N.O.: 25A for 1 minutes, 15A for 1 hour (at 20°C 68°F)
<Wiper motor load (L = Approx. 1mH)>
N.O. side: Min. 5×105 (Inrush 25A, steady 6A at 14V DC)
N.C. side: Min. 5×105 (12A 14V DC at brake current)
(Operating frequency: 1s ON, 9s OFF)
Note: *1. Depends on connection conditions. Also, this does not guarantee repeated switching. We recommend that you confirm operation under actual conditions.
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB225E 201301-T

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]