PCF85176H_10 Просмотр технического описания (PDF) - NXP Semiconductors.

Номер в каталоге

Компоненты Описание

производитель

PCF85176H_10

Universal LCD driver for low multiplex rates

NXP Semiconductors. 

NXP Semiconductors

PCF85176

Universal LCD driver for low multiplex rates

The RMS off-state voltage (Voff(RMS)) for the LCD is calculated with Equation 2:

Voff(RMS)

=

VLCD

--a---2----–----2----a----+-----n---

n × (1 + a)2

(2)

Discrimination is the ratio of Von(RMS) to Voff(RMS) and is determined from Equation 3:

D = -V----o---n--(--R---M----S---) = (---a-----+-----1----)--2----+-----(--n-----–----1----)

(3)

Voff(RMS)

(a – 1)2 + (n – 1)

Using Equation 3, the discrimination for an LCD drive mode of 1:3 multiplex with

1⁄2 bias is 3 = 1.732 and the discrimination for an LCD drive mode of 1:4 multiplex with

1⁄2 bias is

-----2---1--

3

=

1.528 .

The advantage of these LCD drive modes is a reduction of the LCD full scale voltage VLCD

as follows:

• 1:3 multiplex (1⁄2 bias): VLCD = 6 × Voff(RMS) = 2.449Voff(RMS)

• 1:4 multiplex (1⁄2 bias): VLCD =

(---4-----×---------3----)

3

= 2.309Voff(RMS)

These compare with VLCD = 3Voff(RMS) when 1⁄3 bias is used.

It should be noted that VLCD is sometimes referred as the LCD operating voltage.

PCF85176_1

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 01 — 14 April 2010

© NXP B.V. 2010. All rights reserved.

8 of 43

Share Link: