HSB-M4-13DC246X Просмотр технического описания (PDF) - Amphenol Aerospace

Номер в каталоге

Компоненты Описание

производитель

HSB-M4-13DC246X

High Density HDB3/HSB3 Connectors

Amphenol Aerospace 

Amphenol® High Density HDB3 and HSB3

Connectors

INTRODUCTION: FEATURES & PERFORMANCE

AmpAheeronspoacle

HBD3 120 pin Mother Board and Daughter Board

HDB3 & HSB3 HIGH DENSITY CONNECTOR

PERFORMANCE:

Durability

100,000 mating cycles

Insertion/Extraction Force: 1.5 ounce typical per contact

Operating Temperature: -65° to 125°C

Current Rating:

2 amperes Hot swap 1 ampere

maximum (load dependent)

Insulation Resistance: 5 gigaohms minimum

Dielectric Withstanding

Voltage:

750 volts, 60 hertz, rms @ Sea

Level, 250 volts, 60 hertz,

rms @ 70,000 feet elevation

Solderability:

MIL-STD-202, Method 208

Salt Fog:

48 Hours IAW MIL-STD-1344,

method 1001, test condition B

Humidity:

IAW MIL-STD-1344, method

1002, type II

Vibration:

4 hours in each of 3 mutually

perpendicular axes IAW MIL

STD-1344, method 2005, test

condition V, letter H

Shock:

1 shock along each of three

mutually perpendicular axes

IAW MIL-STD-1344, method

2004,test condition G

Data Rate (HSB3):

Capable of up to 6.250 Gbps

(consult Amphenol for

arrangement)

CUSTOM DESIGN AVAILABILITY:

HSB3 Hybrid Connector with Metal Shell

and RF Contacts supplied by SV Microwave*

* See more information on SMPM RF contacts in Other Rectangular Interconnects

Section, page 126. SMPM RF contacts can be supplied by Amphenol

SV Microwave. Phone: 561-840-1800

Website: www.svmicrowave.com

HDB3 Mother Board and Daughter Board Mated

HDB3 & HSB3 HIGH DENSITY CONNECTOR

FEATURES:

Polarization: “D” shaped design

Keying: Optional keys offer 36 unique

keying combinations

Guide Pins Optional guide pins provide

additional alignment

Radial Misalignment:

Capable of correcting up to a

020” initial radial misalignment

Angular Misalignment:

Capable of mating with up to a

2° initial angular misalignment

MATERIALS:

Insulator: Liquid crystal polymer, 30% glass

filled

Contact: Wire: Beryllium copper per ASTM B197;

finish is gold per ASTM B488 over

nickel per AMS-QQ-N-290

Holder: Brass similar to UNS C33500;

available finishes include gold per

MIL-G-45204, tin-lead per MIL-P-

81728 or tin per MIL-T-10727 (RoHS

Compliant)

Sleeve: Stainless steel per AMS-5514,

passivated IAW QQ-P-35 (Daughter-

board, I/O and Stacker connector)

Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com 49

Share Link: