JPP130PQ05 Просмотр технического описания (PDF) - XP Power Limited
Номер в каталоге
Компоненты Описание
производитель
JPP130PQ05 Datasheet PDF : 2 Pages
| |||
Models and Ratings
Output
V1(3, 4)
+5.1 V/12.0 A
+5.1 V/12.0 A
+5.1 V/12.0 A
+5.1 V/12.0 A
Output
V2
+12.0 V/6.0 A
+15.0 V/4.8 A
+24.0 V/3.0 A
+12.0 V/6.0 A
+15.0 V/4.8 A
+24.0 V/3.0 A
+12.0 V/6.0 A
+15.0 V/4.8 A
+24.0 V/3.0 A
+12.0 V/6.0 A
+15.0 V/4.8 A
+24.0 V/3.0 A
+12.0 V/6.0 A
+15.0 V/4.8 A
+24.0 V/3.0 A
+12.0 V/6.0 A
+15.0 V/4.8 A
+24.0 V/3.0 A
+12.0 V/6.0 A
+15.0 V/4.8 A
+24.0 V/3.0 A
+12.0 V/6.0 A
+15.0 V/4.8 A
+24.0 V/3.0 A
Output
V3(3)
Output
V4(3)
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
+5.0 to 24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
-5.0 to -24.0 V/1.0 A
Output
V5(2, 3)
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
3.3 V/12.0 A
JPP130
Model
Number
JPP130PD02
JPP130PD03
JPP130PD04
JPP130PT01
JPP130PT02
JPP130PT03
JPP130PT04
JPP130PT05
JPP130PT06
JPP130PT07
JPP130PT08
JPP130PT09
JPP130PQ01
JPP130PQ02
JPP130PQ03
JPP130PQ04
JPP130PQ05
JPP130PQ06
JPP130PQ07
JPP130PQ08
JPP130PQ09
JPP130PM01
JPP130PM02
JPP130PM03
Notes
1. Minimum 10 CFM required for 130 W operation.
2. V1 and V5 combined output power not to exceed 65 W; V2, V3 and V4 combined output power not to exceed 65 W; V3 and V4 combined output power
not to exceed 30 W.
3. Adjustable range: V1 and V5 are adjustable ±10%, V3 and V4 can be trimmed 5-24 VDC and are factory-set to 12 VDC nominal.
Accessible trim pots are assigned as VR1 for V1, VR2 for V5, VR3 for V3, VR4 for V4 and V2 is fixed.
VR3 and VR4 trim pots are SMD types are located underneath PCB.
4. Minimum load of 0.8 A is required on V1 to regulate V5 where fitted.
5. PFD = TTL low gives warning of at least 10 ms before V1 output drops below 95% of nominal. This signal also provides a minimum of 100 ms delay after
V1 is within regulation.
Mechanical Details
All dimensions are in inches (mm), tolerance: ±0.02 (±0.5) max
Weight: 0.71 lbs (320 g)
0.16 (4.0) Dia Mounting Hole (4 PLS)
N
P1
L
DIRECTION
OF AIR FLOW
4.55 (115.6)
5.00 (127.0)
0.225 (5.72)
6
P2
1
4
P3
1
P4
2
1
1.04 (26.4)
VR2 VR1
0.10 (2.54)
P2 & P4 Connectors: Can accept 18-12 AWG electric wires.
P1 Mating Connector: Molex 09-50-3031 and 2878 series crimp terminals or equivalent.
P3 Mating Connector: Molex 22-01-1043 and 40445 series crimp terminals or equivalent.
0.06 (1.60)
Pin
P1
1
Live
2
Neutral
3
-
4
-
5
-
6
-
PIN CONNECTIONS
P2
V1
Com
Com
V3 or N/C
V4 or N/C
V2 or N/C
P3
-Sense (V5)
+Sense (V5)
PFD signal
Com
-
-
P4(1)
V5
Com
-
-
-
-
Note:
1. P4 only applies to models which have an Output V5 in the
Models and Rating table.
Derating Curve
130
10 CFM
Forced-air Cooling
90
5 CFM
Forced-air Cooling
65 W
45 W
20
0
-10
Convection Cooling
0 10 20 30 40 50
Ambient Temperature (˚C)
10 W
60
04/04/05
Share Link: 