2 In use of ON/OFF CONTROL:
VIN
VIN
VOUT
0.33µF
R
NJM2884/A
CONTROL
GND
NJM2884/A
(*8)
2.2µF
VOUT
(*8) 1.7<Vo≤2.6V version: Co=4.7µF
Vo≤1.7V version: Co=10µF
State of control terminal:
•“H”→ output is enabled.
•“L” or “open” → output is disabled.
*In the case of using a resistance "R" between VIN and control.
If this resistor is inserted, it can reduce the control current when the control voltage is high.
The applied voltage to control terminal should set to consider voltage drop through the resistor “R” and the minimum
control voltage for ON-state.
The VCONT (ON) and ICONT have temperature dependence as shown in the "Control Current vs. Temperature" and "
Control Voltage vs. Temperature" characteristics. Therefore, the resistance "R" should be selected to consider the
temperature characteristics.
Ver.2012-07-12
-7-