5L35021 Просмотр технического описания (PDF) - Integrated Device Technology
Номер в каталоге
Компоненты Описание
производитель
5L35021 Datasheet PDF : 37 Pages
| |||
VersaClock® 3S Programmable
Clock Generator
5L35021
Datasheet
Description
The 5L35021 is a member of the VersaClock 3S programmable
clock generator family with 1.8V operation voltage, and is
designed for industrial, consumer, and PCI Express applications.
The device features a 3 PLL architecture design; each PLL is
individually programmable and allowing up to 6 unique frequency
outputs.
The 5L35021 has built-in features such as Proactive Power
Saving (PPS), Performance-Power Balancing (PPB), Overshot
Reduction Technology (ORT) and extreme low power DCO. An
internal OTP memory allows the user to store the configuration in
the device without programming after power up, then program the
5L35021 again through the I2C interface.
The device has programmable VCO and PLL source selection,
allowing power-performance optimization based on the application
requirements.
Typical Applications
▪ Embedded computing devices
▪ Consumer application crystal replacements
▪ SmartDevice, Handheld, and Consumer applications
Key Specifications
▪ PCIe Gen1/2/3 compliant
▪ Typical 1.5ps rms jitter integer range: 12kHz–20MHz
▪ Typical ultra-power-down current 50μA
▪ <2μA RTC clock in Suspend Mode operation
Features
▪ Configurable OE pin function as OE, PD#, PPS or DFC control
function
▪ Configurable PLL bandwidth; minimizes jitter peaking
▪ PPS: Proactive Power Saving features save power during the
end device power down mode
▪ PPB: Performance Power Balancing feature allows minimum
power consumption based on required performance
▪ DFC: Dynamic Frequency Control feature allows user to
dynamically switch between and up to 4 different frequencies
smoothly
▪ Spread spectrum clock to lower system EMI
▪ I2C interface
▪ Suspend Mode, featuring RTC clock only when system goes
into low-power operation modes
Output Features
▪ 2 DIFF outputs with configurable LPHSCL, LVCMOS output
pairs: 1MHz–250MHz (125MHz with LVCMOS mode)
▪ 1 LVCMOS output: 1MHz–125MHz
▪ LVPECL, LVDS, CML and SSTL logic can be easily supported
with the LP-HCSL outputs. See application note AN-891 for
alternate terminations
▪ Maximum of 5 LVCMOS outputs as REF + 3 × SE + 2 ×
DIFF_T/C as LVCMOS
▪ Low-power 32.768kHz clock supported for SE1 output
Block Diagram
CLKIN/X1
X2
SEL_DFC/ SCL_DFC1
SDA_DFC0
VDD18
VDDA
VBAT
OSC
Programmable
Load Capacitor
Calibration
32.768K
DCO
PLL1
PLL2
PLL3
Mux
&
Divider
VDDDIFF 1
DIFF 1
DIFF 1B
VDDDIFF 2
DIFF2
DIFF2B
VDDSE 1
SE1
OE1
©2017 Integrated Device Technology, Inc.
1
July 13, 2017
Share Link: 