LB1247 Просмотр технического описания (PDF) - SANYO -> Panasonic
Номер в каталоге
Компоненты Описание
производитель
LB1247 Datasheet PDF : 3 Pages
| |||
Ordering number:ENN1367B
Monolithic Digital IC
LB1247
Active-Low Input, 8-Unit, High-Current,
Low-Saturation Driver
Overview
The LB1247 is a low active input type 8-unit driver array
with high current, low saturation output.
Applications
• 4-phase stepping motor driver of 2 channels.
• Especially suited for X-Y axis plotter printer driver.
• High current, low saturation voltage general-purpose 8-
unit driver (relay, LED, lamp solenoid, etc.).
Features
• Low active input type.
• Input protecting diodes.
• High current capacity (400mA) and low saturation volt-
age (0.5V max).
• With spark killer diodes.
Package Dimensions
unit:mm
3021C-DIP20
[LB1247]
24.0
20
11
1
10
1.0
(0.57)
2.54 0.5
1.2
SANYO : DIP20
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Maximum supply voltage
Output supply voltage
Input supply voltage
Output current
Spark killer diode forward current
GND pin current
Instantaneous current drain
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
Conditions
VCC1,2 max
VOUT
VIN
IOUT
IFSM
IGND
ICCP
Pd max
GND≤VIN
Per unit
Pulse width≤35ms, duty 5%
Pulse width≤35ms
Pulse width≤35ms, duty 5%
Topr
Tstg
Allowable Operating Ranges at Ta = 25˚C
Parameter
Supply voltage
Input H-level voltage
Input L-level voltage
Symbol
VCC1
VDD
VIH
VIL
Conditions
GND≤VIN, IOUT=200mA
IOUT≤100µA
Ratings
Unit
–0.3 to +7.0 V
–0.3 to +10.0 V
VDD–7.0 to VDD+15 V
400 mA
400 mA
3000 mA
3000 mA
1130 mW
–20 to +75 ˚C
–40 to +125 ˚C
Ratings
Unit
2.3 to 6.0 V
2.3 to 6.0 V
VDD–6.0 to VDD–2.3 V
VDD–0.7 to VDD+15 V
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
13101TN (KT)/7067KI/7315/N143KI, TS No.1367–1/3
Share Link: 