IL358 Просмотр технического описания (PDF) - IK Semicon Co., Ltd
Номер в каталоге
Компоненты Описание
производитель
IL358 Datasheet PDF : 7 Pages
| |||
TECHNICAL DATA
Low Power Dual Operational Amplifier
IL358
The IL358 contains two independent high gain operational amplifiers with
internal frequency compensation. The two op-amps operate over a wide
voltage range from a single power supply. Also use a split power supply. The
device has low power supply current drain, regardless of the power supply
voltage. The low power drain also makes the IL358 a good choice for battery
operation.
When your project calls for a traditional op-amp function, now you can
streamline your design with a simple single power supply. Use ordinary
+5VDC common to practically any digital system or personal computer
application, without requiring an extra 15V power supply just to have the
interface electronics you need.
The IL358 is a versatile, rugged workhorse with a thousand-and-one uses,
from amplifying signals from a variety of transducers to dc gain blocks, or
any op-amp function. The attached pages offer some recipes that will have
your project cooking in no time.
• Internally frequency compensated for unity gain
• Large DC voltage gain: 100dB
• Wide power supply range:
3V ~ 32V (or ±1.5V ~ ±16V)
• Input common-mode voltage range includes ground
• Large output voltage swing: 0V DC to VCC-1.5V DC
• Power drain suitable for battery operation
• Low input offset voltage and offset current
• Differential input voltage range equal to the power supply voltage
• Possible to exchange the position of Pin9 for Pin1 because of Pin
Connection being symmetric (IL358S only)
LOGIC DIAGRAM
SIP-9
SIP-8
ORDERING INFORMATION
IL358N Plastic
IL358D SOIC
IL358S-9 SIP-9
IL358S SIP-8
TA = -40° to 85° C
for all packages.
PIN ASSIGNMENT
PIN 4 = GND
PIN 8=VCC
Rev. 01
Share Link: 