RS5C314 Просмотр технического описания (PDF) - RICOH Co.,Ltd.
Номер в каталоге
Компоненты Описание
производитель
RS5C314 Datasheet PDF : 4 Pages
| |||
RS5C314
3. Write Data
Writing data to the real-time clock requires inputting setting data (control bits and address bits) to the SIO pin and
then establishing the write mode by using a control bit R/W in the same manner as in read operation.
*) Control bits and address bits are described in the previous section on read cycle.
• Data bits D3 to D0 : inputs writing data to the counter or the register describing the functions in order of
MSB to LSB.
3.1 Write Cycle Flow
1. The CE pin is switched from the low level to the high level.
2. Four control bits (with the first bit ignored) and four write address bits are input from the SIO pin. At this
time, control bits R/W and DT are set equally to 0 while a control bit AD is set to 1 (at the shift clock pulses
1A to 8A from the SCLK pin).
3. Four control bits and four bits of data to be written are input in the descending order of their significance. At
this time, control bits R/W and AD are set equally to 0 while a control bit DT is set to 1 (at the shift clock pulses
1B to 8B from the SCLK pin).
4. When write cycle is continued, control bits and address bits are input at the shift clock pulse 1C and later in the
same manner as at the shift clock pulse 1A.
5. At the end of write operation, control bits R/W, AD, and DT are set equally to 0 (at the rising edge of the fifth
shift clock pulse and later from the SCLK pin) or the CE pin is switched from the high level to the low level (after
tCEH from the rising edge of the eighth shift clock pulse from the SCLK pin).
CE
SCLK
1A 2A 3A 4A 5A 6A 7A 8A 1B 2B 3B 4B 5B 6B 7B 8B 1C 2C 3C
Reading from shift register
Input to
SIO pin
* * * * R/W AD DT A3 A2 A1 A0
R/W AD DT D3 D2 D1 D0
R/W AD
Control bits
Address bits
Control bits
Data bits
Output from
SIO pin
(Hi-z)
(Internal processing)
Setting of
control bits
Writing to
address register
Setting of
control bits
(Hi-z)
End of write operation
* * ) In the above figure, the “ ” mark indicates arbitrary data; and the diagonally shaded area indicates the high or low level.
RICOH COMPANY, LTD.
ELECTRONIC DEVICES DIVISION
HEADQUARTERS
13-1, Himemuro-cho, Ikeda City, Osaka 563-8501, JAPAN
Phone +81-727-53-6003 Fax +81-727-53-2120
YOKOHAMA OFFICE (International Sales)
3-2-3, Shin-Yokohama, Kohoku-ku, Yokohama City, Kanagawa 222-8530,
JAPAN
Phone +81-45-477-1697 Fax +81-45-477-1694 · 1695
http://www.ricoh.co.jp/LSI/english/
RICOH CORPORATION
ELECTRONIC DEVICES DIVISION
SAN JOSE OFFICE
1996 Lundy Avenue, San Jose, CA 95131, U.S.A.
Phone +1-408-944-3306 Fax +1-408-432-8375
http://www.ricoh-usa.com/semicond.htm
Share Link: 