ML60851D Просмотр технического описания (PDF) - Oki Electric Industry

Номер в каталоге

Компоненты Описание

производитель

ML60851D

USB Device Controller

Oki Electric Industry 

1Semiconductor

PEDL60851D-01

ML60851D

End Point 2 Receive FIFO (EP2RXFIFO)

Read address

42h

Write address

—

D7 D6 D5 D4 D3 D2 D1 D0

After a hardware reset x

x

x

x

x

x

x

x

After a bus reset

x

x

x

x

x

x

x

x

Definition

EP2 Receive data (R)

It is possible to read out the EP2 receive data by reading the address 42h. When EP2 is set for bulk reception (Bulk

OUT), the local MCU should read EP2RXFIFO when the ML60851D issues an EP2 packet ready interrupt request.

It is possible to read successively the data in the packet by reading continuously. When the data transfer direction

of EP2 is set as ‘Transmit’, all accesses to this address will be invalid.

The EP2RXFIFO is cleared under the following conditions:

1. When an OUT token is received for EP2.

2. When the EP2 receive packet ready bit is reset. (A “1” is written in PKTRDY(2).)

3. When the local MCU writes a “0” in the stall bit (EP2CON(1)).

8/82

Share Link: