ASCELL3912 Просмотр технического описания (PDF) - austriamicrosystems AG

Номер в каталоге

Компоненты Описание

производитель

ASCELL3912

ISM 868 MHz, 433 MHz and 315 MHz FSK Receiver Cell

austriamicrosystems AG 

ISM 868 MHz, 433 MHz and 315 MHz FSK Receiver Cell – Preliminary Data Sheet

ASCell3912

Austria Mikro Systeme International AG

1.2.6 Timing Diagrams

The following Figure 3 shows the timing for the write operation into the configuration register.

First the opcode is transmitted and it is followed by 9 instruction bits.

D_CLK

DATA

D_EN

0

1

LNA

FB1

FB0

STR5

STR0

t

Figure 3:

Write timing for the configuration register..

The following Figure 4 shows the timing of a read operation from the status register. After writing

the operation code to the ASCell3912, the ASCell3912 stays in high impedance state for one

more clock cycle and starts transmission of the selected bit sequence after that period.

D_CLK

DATA

D_EN

µC

1

0

gap=1

DR

SC3912

RX

RQ1

RQ0

t

Figure 4:

Read timing for status register.

In the following Figure 5 shows read out of the received data. In the example `Bx-bz` stands for

bit ´z´ of Byte ´y´, so B7-b5 depicts bit 5 of byte 7.

D_CLK

DATA

D_EN

µC

1

1

gap=1 B0-b0

B0-b1

SC3912

B15-b6

B15-b7

t

Figure 5:

Read out timing for received data (16 Bytes).

1.2.7 Interrupt and Wake-Up Pins

To provide the micro controller with time-critical information the receive/end transmission inter-

rupt (RE_INT) line is used. Figure 2 shows the timing of the RE_INT and WAKE_UP signals

during the reception. A high pulse is issued on this line, when one of the both conditions appear:

• The reception of data is completed for the first time after a receiver wake-up.

• The transmission of data has stopped. This interrupt is necessary status oriented CMT for

comfort orientated central locking functions (like window closing).

Rev. A, February 2000

Page 8 of 14

Share Link: