C0402C820J3GACTU Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

производитель

C0402C820J3GACTU

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

Unspecified 

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

C0G Dielectric, 10 – 250 VDC (Commercial Grade)

Packaging C-Spec Ordering Options Table

Packaging Type1

Packaging/Grade

Ordering Code (C-Spec)

Bulk Bag/Unmarked

7" Reel/Unmarked

13" Reel/Unmarked

7" Reel/Unmarked/2 mm pitch2

13" Reel/Unmarked/2 mm pitch2

Not required (Blank)

TU

7411 (EIA 0603 and smaller case sizes)

7210 (EIA 0805 and larger case sizes)

7081

7082

1 Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.

1 The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain

capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see “Capacitor Marking”.

2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case

size devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.

Benefits cont'd

• Preferred capacitance solution at line frequencies and into the MHz range

• No capacitance change with respect to applied rated DC voltage

• Negligible capacitance change with respect to temperature from −55°C to +125°C

• No capacitance decay with time

• Non-polar device, minimizing installation concerns

• 100% pure matte tin-plated termination finish allowing for excellent solderability

• SnPb plated termination finish option available upon request (5% Pb minimum)

Applications

Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling,

bypass, filtering, transient voltage suppression, blocking and energy storage.

Qualification/Certification

Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are

referenced in Table 4, Performance and Reliability.

Environmental Compliance

Lead (Pb)-free, RoHS, and REACH compliant without exemptions.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com

C1003_C0G • 7/21/2016

2

Share Link: