61083-044402LF Просмотр технического описания (PDF) - Unspecified
Номер в каталоге
Компоненты Описание
производитель
61083-044402LF Datasheet PDF : 9 Pages
| |||
NUMBER
GS-12-547
TYPE
PRODUCT SPECIFICATION
TITLE
0.8mm BergStak® Product Specification
PAGE
REVISION
2 of 8
G
AUTHORIZED BY
Bob Gu
DATE
27 Feb 17
CLASSIFICATION
UNRESTRICTED
5.0 REQUIREMENTS
5.1 Qualification
Connectors furnished under this specification shall be capable of meeting the qualification test
requirements specified herein.
5.2 Material
5.2.1 Housing: All housing materials shall be high temperature plastic, rated flame retardant 94V-0 in
accordance with UL-94.
5.2.2 Receptacle Terminal: Nickel Copper
5.2.3Plug Terminal: Brass.
5.2.4Metal Cap: Stainless steel.
5.2.5Hold Down: Brass.
5.3 Finish
The finish for applicable components shall be specified in product drawings with plating area, plating
material and plating thickness.
5.4 The thickness of the PCB solder paste
Below data is FCI recommended dimension, For some customer’s process are different (such as,
PCB thickness, solder temperature, solder paste type, etc.), customer can according to the actual
application environment adjust the solder paste thickness.
5.4.1 The position less than 120pin,recommend using solder paste thickness 0.15mm Min.
5.4.2 The position greater than or equal to 120pin,recommend using solder paste thickness
0.18mm Min.
5.5 Design and Construction
The connector shall be a multi-piece assembly having two rows of contacts with surface mount solder-
tail terminations for installation on printed wiring board.
5.6 Rating
Voltage Rating
Current Rating
Temperature Rating
100V AC
0.8A Max.
-40°C ~ 125°C
6.0 PERFORMANCE
Unless otherwise specified, the performance of connectors given in the attached list shall satisfy the values
specified in Table 6.1. The performance test shall follow the test method and the test sequence given in
Table 6.2 & 6.3 under the environmental conditions listed below. All connectors to be tested shall be free of
defects such as burr, flaw, void, blister etc. which will affect the life and application of connectors.
•
Temperature ---------- 15°C ~ 35°C
•
Humidity ---------------- 25% ~ 85%
•
Pressure --------------- 86 ~ 106KPa
Copyright FCI
Form E-3334
Rev F
PDS: Rev :G
GS-01-001
STATUS:Released
Printed: Mar 07, 2017
Share Link: 