BFC246718473 Просмотр технического описания (PDF) - Vishay Semiconductors

Номер в каталоге

Компоненты Описание

производитель

BFC246718473

Interference Suppression Film Capacitors

Vishay Semiconductors 

www.vishay.com

MKP338 4 X2

Vishay BCcomponents

APPROVALS

SAFETY APPROVALS X2

VOLTAGE

VALUE

FILE NUMBERS

LINK

EN 60384-14 (ENEC)

(= IEC 60384-14 ed-4 (2013))

300 VAC

10 nF to 10 μF

ENEC16/FI/19/10004 www.vishay.com/doc?28208

UL 60384-14

CSA-E384-14

300 VAC

300 VAC

10 nF to 10 μF

10 nF to 10 μF

E354331

E354331

www.vishay.com/doc?28187

CB-test certificate

300 VAC

10 nF to 10 μF

FI-39830

www.vishay.com/doc?28207

The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the

ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;

Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland; and United Kingdom.

MOUNTING

Normal Use

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for

mounting in printed-circuit boards by means of automatic insertion machines.

For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139

Specific Method of Mounting to Withstand Vibration and Shock

In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the

printed-circuit board:

• For pitches  15 mm capacitors shall be mechanically fixed by the leads

• For longer pitches the capacitors shall be mounted in the same way and the body clamped

Space Requirements on Printed Circuit Board

The maximum space for length (Imax.), width (wmax.) and height (hmax. ) of film capacitors to take in account on the printed circuit

board is shown in the drawings.

• For products with pitch  15 mm, w = l = 0.3 mm; h = 0.1 mm

• For products with 15 mm < pitch  27.5 mm, w = l = 0.5 mm; h = 0.1 mm

• For products with 15 mm < pitch  37.5 mm, w = l = 0.7 mm; h = 0.5 mm

• For products with 15 mm < pitch  52.5 mm, w = l = 1.0 mm; h = 0.5 mm

Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product

concerned.

Eccentricity

wmax. = W + Δ

Imax. = I + Δ

CBA116

hmax. = h + Δ

Seating plane

SOLDERING CONDITIONS

For general soldering conditions and wave soldering profile, we refer to the application note: 

“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171

Storage Temperature

Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation

Ratings and Characteristics Reference Conditions

Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of

86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.

For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at

the rated temperature and a relative humidity not exceeding 20 %.

Revision: 25-Jul-2019

5

Document Number: 28118

For technical questions, contact: rfi@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: