EC8456-000 Просмотр технического описания (PDF) - TE Connectivity

Номер в каталоге

Компоненты Описание

производитель

EC8456-000

BUDGET THERMAL TRANSFER PRINTER

TE Connectivity 

TECHNICAL DATA SHEET

TTDS-256

PRINTER ORDERING INFORMATION

DESCRIPTION

T200-IDENT-PRINTER

T200-IDENT-SWARE-PRINTER

PART NUMBER

EC6996-000

EC6997-000

PRINTER PROPERTIES

PERFORMANCE

PRINT SPEED

30, 40, 50, 75, 100, 125mm/s. (1, 1.5, 2, 3, 4, 5 in/s)

PRINT WIDTH MAX:

105.7mm (4.2in)

PRINT DEFINITION:

300 dpi Thermal Transfer

LABEL WIDTH

5 to 120mm (0.16 to 4.2 in), 116mm (4.6 in) backing paper width

LABEL HEIGHT

5mm (0.2 in) minimum to 1,000mm (39.4 in) maximum

MEDIA ROLL CAPACITY

INK RIBBONS

CUT MODE

152mm (6.0 in) Outside Diameter, inside core diameter 38 – 76mm

(1.5 – 3 in)

25.4mm (1 inch) core, ink inside or outside, variable length up to

360M (1181 ft)

Cutter & Perforator available as accessories.

SENSOR

Variable position Gap & Reflective (automatic calibration)

ELECTRICAL REQUIREMENTS 100 to 240V - 50/60Hz, PFC

OPERATING TEMPERATURE

+5°C to +40°C (+41°F to +104°F).

OPERATING HUMIDITY

10% to 85% non-condensing RH

POWER CONSUMPTION

PHYSICAL CHARACTERISTICS

PERFORATOR/CUTTER

INTERFACES

Power save mode 1.8W

Typical 45W / Max 100W

Depth:

322mm (12.7 inches)

Height:

189mm (7.4 inches)

Width:

253mm (10.0 inches)

Weight:

4kg (8.8 lb)

Perforator: maximum product width 5 - 45mm (0.2 - 1.8 in).

Cutter: maximum product width 5 - 85mm (0.2 - 3.3 in).

Perforator/Cutter: 200 cuts/perforations per minute. Cut/

Perforate length 5 - 1000mm

USB 2.0 High speed slave for PC connection at the rear of the printer

USB master 1 at rear of the printer (Up to 500mA), 2 at front of

printer (Up to 100mA)

RS232 C 1.200 up to 230.400 Baud rate / 8 Bit

Ethernet 10 / 100 Base T, LPD, Raw IP-Printing, ftp-Printing, DHCP,

HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP

ELECTRONICS

RAM 64MB, Processor speed 400MHz, Memory IFFS flash 16MB

PRINTER SPARE PARTS ORDERING INFORMATION (consumables)

300 dpi Printhead

Description

T200-IDENT-PRINTHEAD

Part number

EC8927-000

Drive roller

Part number

T200-IDENT-DR4-DRIVEROLLER

Description

EC8926-000

PAGE 3

CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04

RAIL /// TTDS-256 –ISSUE 6, T200-IDENT-PRINTER TE Proprietary Information

Share Link: