STM32-EMBPI/14 Просмотр технического описания (PDF) - STMicroelectronics

Номер в каталоге

Компоненты Описание

производитель

STM32-EMBPI/14

Embedded Pi, triple-play platform for STM32, Raspberry Pi and Arduino™

STMicroelectronics 

STM32-EMBPI/14

Embedded Pi, triple-play platform for STM32,

Raspberry Pi and Arduino™

Data brief

Features

 STM32F103 running at 72 MHz with

128 Kbytes Flash memory and 20 Kbytes RAM

 Form factor compatible with both 5 V and 3V3

Arduino™ shields, selectable with jumpers

 Hundreds of Arduino™ shields available on the

market enhance the control capability of

Embedded Pi and Raspberry Pi, e.g. to control

motor, sensors, etc.

 Direct connection to the Raspberry Pi

 Selection of one of the three modes of

operation with a jumper

 Arduino™ form factor compatible interfaces:

– 1 SPI

– 1 I2C

– 4 PWM

– 1 UART

– 6 analog inputs

 Embedded Pi extended interfaces:

– 1 SPI

– 1 I2C

– 2 PWM

– 1 UART

– 6 analog inputs

– 1 CAN

Description

The Embedded Pi, based on the STM32F103

MCU, is a triple-play platform for Raspberry Pi,

Arduino™ and the STM32 MCU family. Blending

all three communities together, the Embedded Pi

helps you to get the most out of each platform.

The Embedded Pi can operate in 3 modes:

Standalone, ST-Adapter and Raspberry Pi.

In Standalone mode the Embedded Pi acts as a

base platform, the STM32F103 controls the

Arduino™ shields directly.

In ST-Adapter mode the Embedded Pi controls

the Arduino™ shields, and the Raspberry Pi acts

as the GUI or command line console that send

commands and data to, and receives data from,

the Embedded Pi.

In Raspberry Pi mode the Embedded Pi acts as a

hardware connection bridge between the

Raspberry Pi and Arduino™ shields.

For more information, visit

www.element14.com/embedded-pi

October 2013

DocID025287 Rev 1

For further information contact your local STMicroelectronics sales office.

1/3

www.st.com

Share Link: