PCA9685PW Просмотр технического описания (PDF) - NXP Semiconductors.

Номер в каталоге

Компоненты Описание

производитель

PCA9685PW

16-channel, 12-bit PWM Fm+ I2C-bus LED controller

NXP Semiconductors. 

NXP Semiconductors

PCA9685

16-channel, 12-bit PWM Fm+ I2C-bus LED controller

7.1.4 Software Reset I2C-bus address

The address shown in Figure 5 is used when a reset of the PCA9685 needs to be

performed by the master. The Software Reset address (SWRST Call) must be used with

R/W = logic 0. If R/W = logic 1, the PCA9685 does not acknowledge the SWRST. See

Section 7.6 “Software reset” for more detail.

R/W

00000110

002aab416

Fig 5. Software Reset address

Remark: The Software Reset I2C-bus address is a reserved address and cannot be used

as a regular I2C-bus slave address or as an LED All Call or LED Sub Call address.

7.2 Control register

Following the successful acknowledgement of the slave address, LED All Call address or

LED Sub Call address, the bus master will send a byte to the PCA9685, which will be

stored in the Control register.

This register is used as a pointer to determine which register will be accessed.

D7 D6 D5 D4 D3 D2 D1 D0

002aac826

Fig 6.

reset state = 00h

Remark: The Control register does not apply to the Software Reset I2C-bus address.

Control register

PCA9685

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 3 — 2 September 2010

© NXP B.V. 2010. All rights reserved.

8 of 51

Share Link: