THS3014-TK Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

производитель

THS3014-TK

Handheld Oscilloscopes

Unspecified 

Data Sheet

Isolated-channel technology is specified to 1000 VRMS maximum float voltage.

Four isolated input channels easily handle any type of mixed signal inputs.

Portable Performance for Challenging

Environments

With 4 isolated channels and up to 7 hours of battery life, the lightweight

THS3000 Handheld Oscilloscope Series enables you to safely make

floating or differential measurements on your bench or in the field. Now

you can tackle tough environments with the performance you expect from

Tektronix – safely and affordably.

Accurately Measure Your Signals

With up to 200 MHz bandwidth, 4 channels, and 5 GS/s maximum sample

rate, no other oscilloscope offers as much bandwidth and sample rate in a

portable handheld form factor. The THS3000 Handheld Oscilloscope Series

has 10,000 points record length per channel, enabling you to capture more

signal information at higher sample rates to clearly see signal details. For

applications where it is important to measure slow-changing signals over

long time periods, the THS3000 Series offers Roll mode that extends the

record length to 30,000 points of signal information.

Safely Make Floating and Differential

Measurements

Making accurate and safe measurements on power electronics, power

semiconductors, and other electronics applications can be challenging

when the signal reference is floating and not referenced to earth ground.

When your signal ranges from low voltage to high voltage (kV) or you

must use probing techniques that can potentially create ground loops, the

problem is compounded.

To enable floating measurements, the THS3000 Series is architecturally

different than most other oscilloscopes. All input channels are fully isolated

Input signal and float voltage maximum safety ratings.

from the main chassis and from each other. Additionally the power adapter

and USB interface are fully isolated to ensure safe measurements and

eliminate the risk of unintentional grounding or accidental short circuits.

When configured with the proper probes you can be assured you’ll be able

to make quick, safe, and accurate measurements.

Selecting the Right Probe

Scope/Probe

(Attenuation)

THS3000

(1X input)

THP0301 (10X)

P5150 (50X)

P5122 (100X)

Maximum Safety Rating

Reference Input Signal

Float Safety Safety

Rating*1

Rating

600 VRMS

CAT III

1000 VRMS

CAT II

300 VRMS

CAT III

600 VRMS CAT II

600 VRMS CAT II

300 VRMS

CAT III

300 VRMS

CAT III

1000 VRMS

CAT II

1000 VRMS

CAT II

THS3000 Viewable Signal

On-screen On-screen

P-P Voltage RMS Voltage

800 Vp-p

282 VRMS

849 Vp-p

2828 Vp-p

2828 Vp-p

300 VRMS

1000 VRMS

1000 VRMS

*1 Passive probe reference leads have no attenuation so any working voltage or overvoltage transients pass

straight through to the scope reference. Thus, a passive probe reference float rating can never exceed the

scope reference float rating.

2 www.tektronix.com

Share Link: